[PATCH v9 7/8] PCI: imx6: Move the phy driver callbacks to the proper places

[Richard Zhu]

To make it more reasonable, move the phy_power_on/phy_init callbacks to
the proper places.
- move the phy_power_on() out of imx6_pcie_clk_enable().
- move the phy_init() out of imx6_pcie_deassert_core_reset().

In order to save power consumption, turn off the clocks and regulators when
the imx6_pcie_host_init() return error.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 77 +++++++++++++++++++++------
 1 file changed, 61 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d122c12193a6..f0ffd9011975 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -497,14 +497,6 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
 		goto err_ref_clk;
 	}
 
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX8MM:
-		if (phy_power_on(imx6_pcie->phy))
-			dev_err(dev, "unable to power on PHY\n");
-		break;
-	default:
-		break;
-	}
 	/* allow the clocks to stabilize */
 	usleep_range(200, 500);
 	return 0;
@@ -597,10 +589,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX8MQ:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
-		break;
 	case IMX8MM:
-		if (phy_init(imx6_pcie->phy))
-			dev_err(dev, "waiting for phy ready timeout!\n");
 		break;
 	case IMX7D:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
@@ -918,15 +907,38 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
 	imx6_pcie_init_phy(imx6_pcie);
+	if (imx6_pcie->phy != NULL) {
+		ret = phy_power_on(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy power up failed.\n");
+			return ret;
+		}
+	}
+
 	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
 	if (ret < 0) {
 		dev_err(dev, "pcie host init failed: %d.\n", ret);
-		return ret;
+		goto err_exit0;
+	} else if (imx6_pcie->phy != NULL) {
+		ret = phy_init(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "waiting for phy ready timeout!\n");
+			goto err_exit1;
+		}
 	}
 
 	imx6_setup_phy_mpll(imx6_pcie);
 
 	return 0;
+
+err_exit1:
+	imx6_pcie_clk_disable(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+err_exit0:
+	if (imx6_pcie->phy != NULL)
+		phy_power_off(imx6_pcie->phy);
+	return ret;
 }
 
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
@@ -1031,14 +1043,47 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 		regulator_disable(imx6_pcie->vpcie);
 
 	imx6_pcie_init_phy(imx6_pcie);
-	imx6_pcie_deassert_core_reset(imx6_pcie);
-	dw_pcie_setup_rc(pp);
+	if (imx6_pcie->phy != NULL) {
+		ret = phy_power_on(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy power up failed.\n");
+			return ret;
+		}
+	}
+
+	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+	if (ret < 0) {
+		dev_err(dev, "pcie deassert core reset failed: %d.\n", ret);
+		goto err_exit0;
+	} else if (imx6_pcie->phy != NULL) {
+		ret = phy_init(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy init failed.\n");
+			goto err_exit1;
+		}
+	}
 
+	dw_pcie_setup_rc(pp);
 	ret = imx6_pcie_start_link(imx6_pcie->pci);
-	if (ret < 0)
-		dev_info(dev, "pcie link is down after resume.\n");
+	if (ret < 0) {
+		/*
+		 * Return ret directly, since there are error exit
+		 * handle in imx6_pcie_start_link()
+		 */
+		dev_err(dev, "pcie link is down after resume.\n");
+		return ret;
+	}
 
 	return 0;
+
+err_exit1:
+	imx6_pcie_clk_disable(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+err_exit0:
+	if (imx6_pcie->phy != NULL)
+		phy_power_off(imx6_pcie->phy);
+	return ret;
 }
 #endif
 
-- 
2.25.1