[PATCH v1 6/6] ARM: dts: lan966x: add basic Kontron KSwitch D10 support

[Tudor.Ambarus at microchip.com]

On 3/4/22 10:31, Claudiu.Beznea at microchip.com wrote:
>> +&flx4 {
>> +       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
>> +       status = "okay";
>> +};
> Although there is 1:1 mapping b/w ids of flexcoms and the embedded blocks
> (flxX has usartX, i2cX, spiX) and there is nothing wrong with the approach
> here I found a bit hard to follow if the correspondent embedded block
> (i2c, spi, usart) is enabled or not.
> 

+1