[PATCH v4 21/22] arm64: dts: mt8192: Add gce info for display nodes

Nícolas F. R. A. Prado nfraprado at collabora.com
Tue Mar 22 14:25:09 PDT 2022


On Fri, Mar 18, 2022 at 10:45:33PM +0800, Allen-KH Cheng wrote:
> Add gce info for display nodes
> - It's required to get drivers' CMDQ support

It's better to use complete sentences instead of bullet points like this. Also
you could be more descriptive in the commit message. Suggestion:

Add GCE (Global Command Engine) properties to the display nodes in order to
enable the usage of the CMDQ (Command Queue), which is required for operating
the display.

> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>

Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>

> ---
>  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 08e0dd2483d1..f0f0f067c023 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -1203,6 +1203,9 @@
>  		mmsys: syscon at 14000000 {
>  			compatible = "mediatek,mt8192-mmsys", "syscon";
>  			reg = <0 0x14000000 0 0x1000>;
> +			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,
> +				 <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
>  		};
> @@ -1212,6 +1215,8 @@
>  			reg = <0 0x14001000 0 0x1000>;
>  			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
>  			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
> +			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
> +					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
>  		};
>  
>  		smi_common: smi at 14002000 {
> @@ -1253,6 +1258,7 @@
>  			iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>,
>  				 <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
>  		};
>  
>  		ovl_2l0: ovl at 14006000 {
> @@ -1263,6 +1269,7 @@
>  			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
>  			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>,
>  				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
>  		};
>  
>  		rdma0: rdma at 14007000 {
> @@ -1274,6 +1281,7 @@
>  			mediatek,larb = <&larb0>;
>  			mediatek,rdma-fifo-size = <5120>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
>  		};
>  
>  		color0: color at 14009000 {
> @@ -1283,6 +1291,7 @@
>  			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
>  		};
>  
>  		ccorr0: ccorr at 1400a000 {
> @@ -1291,6 +1300,7 @@
>  			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
>  		};
>  
>  		aal0: aal at 1400b000 {
> @@ -1300,6 +1310,7 @@
>  			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_AAL0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
>  		};
>  
>  		gamma0: gamma at 1400c000 {
> @@ -1309,6 +1320,7 @@
>  			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
>  		};
>  
>  		postmask0: postmask at 1400d000 {
> @@ -1318,6 +1330,7 @@
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
>  			iommus = <&iommu0 M4U_PORT_L0_DISP_POSTMASK0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
>  		};
>  
>  		dither0: dither at 1400e000 {
> @@ -1327,6 +1340,7 @@
>  			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>;
>  			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
>  			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
>  		};
>  
>  		dsi0: dsi at 14010000 {
> @@ -1351,6 +1365,7 @@
>  			clocks = <&mmsys CLK_MM_DISP_OVL2_2L>;
>  			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>,
>  				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
>  		};
>  
>  		rdma4: rdma at 14015000 {
> @@ -1361,6 +1376,7 @@
>  			clocks = <&mmsys CLK_MM_DISP_RDMA4>;
>  			iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>;
>  			mediatek,rdma-fifo-size = <2048>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
>  		};
>  
>  		dpi0: dpi at 14016000 {
> -- 
> 2.18.0
> 
> 



More information about the linux-arm-kernel mailing list