[PATCH 2/2] ARM: dts: lpc18xx: Update SPI dma properties

[Kuldeep Singh]

SPI pl022 describes dma-names as RX,TX.
Reorder dmas and dma-names properties to follow specified convention.
And while at it, also fix entries order within dma pairs.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k at gmail.com>
CC: soc at kernel.org
---
 arch/arm/boot/dts/lpc18xx.dtsi | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 10b8249b8ab6..b3070cc927b7 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -317,8 +317,7 @@ ssp0: spi at 40083000 {
 			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
 			clock-names = "sspclk", "apb_pclk";
 			resets = <&rgu 50>;
-			dmas = <&dmamux  9 0 2
-				&dmamux 10 0 2>;
+			dmas = <&dmamux  10 0 2>, <&dmamux 9 0 2>;
 			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -424,16 +423,12 @@ ssp1: spi at 400c5000 {
 			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
 			clock-names = "sspclk", "apb_pclk";
 			resets = <&rgu 51>;
-			dmas = <&dmamux 11 2 2
-				&dmamux 12 2 2
-				&dmamux  3 3 2
-				&dmamux  4 3 2
-				&dmamux  5 2 2
-				&dmamux  6 2 2
-				&dmamux 13 2 2
-				&dmamux 14 2 2>;
-			dma-names = "rx", "tx", "tx", "rx",
-				    "tx", "rx", "rx", "tx";
+			dmas = <&dmamux 12 2 2>, <&dmamux 11 2 2>,
+					<&dmamux  4 3 2>, <&dmamux  3 3 2>,
+					<&dmamux  6 2 2>, <&dmamux  5 2 2>,
+					<&dmamux 14 2 2>, <&dmamux 13 2 2>;
+			dma-names = "rx", "tx", "rx", "tx",
+						"rx", "tx", "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.25.1