[PATCH v2 1/4] ARM: dts: integratorap: Update spi node properties

[Kuldeep Singh]

As per spi pl022 binding, SPI clock name is "sspclk" and not "spiclk".
Fix it.

Also, update ssp node name to spi to enable spi bindings check.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k at gmail.com>
---
v2:
- Remove ssp alias
- Rebase to tip

 arch/arm/boot/dts/integratorap-im-pd1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index d47bfb66d069..4c22e4436271 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -178,12 +178,12 @@ uart at 200000 {
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp at 300000 {
+	spi at 300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio at 400000 {
-- 
2.25.1