[PATCH] sched: topology: make cache topology separate from cpu topology

[王擎]

>>
>>
>> >>
>> >>
>> >> >On Thu, 10 Mar 2022 at 13:59, Qing Wang <wangqing at vivo.com> wrote:
>> >> >>
>> >> >> From: Wang Qing <wangqing at vivo.com>
>> >> >>
>> >> >> Some architectures(e.g. ARM64), caches are implemented below:
>> >> >> cluster:                     ****** cluster 0 *****      ****** cluster 1 *****
>> >> >> core:                         0      1          2      3          4      5           6      7
>> >> (add cache level 1)        c0    c1        c2    c3         c4    c5         c6    c7
>> >> >> cache(Leveln):         **cache0**  **cache1**  **cache2**  **cache3**
>> >> (add cache level 3)        *************share level 3 cache ***************
>> >> >> sd_llc_id(current):     0      0          0      0          4      4           4      4
>> >> >> sd_llc_id(should be): 0      0          2      2          4      4           6      6
>> >> >>
>> >> Here, n always be 2 in ARM64, but others are also possible.
>> >> core[0,1] form a complex(ARMV9),  which share L2 cache, core[2,3] is the same.
>> >>
>> >> >> Caches and cpus have different topology, this causes cpus_share_cache()
>> >> >> return the wrong value, which will affect the CPU load balance.
>> >> >>
>> >> >What does your current scheduler topology  look like?
>> >> >
>> >> >For CPU 0 to 3, do you have the below ?
>> >> >DIE [0     -     3] [4-7]
>> >> >MC  [0] [1] [2] [3]
>> >>
>> >> The current scheduler topology consistent with CPU topology:
>> >> DIE  [0-7]
>> >> MC  [0-3] [4-7]  (SD_SHARE_PKG_RESOURCES)
>> >> Most Android phones have this topology.
>> >> >
>> >> >But you would like something like below for cpu 0-1 instead ?
>> >> >DIE [0     -     3] [4-7]
>> >> >CLS [0 - 1] [2 - 3]
>> >> >MC  [0] [1]
>> >> >
>> >> >with SD_SHARE_PKG_RESOURCES only set to MC level ?
>> >>
>> >> We don't change the current scheduler topology, but the
>> >> cache topology should be separated like below:
>> >
>> >The scheduler topology is not only cpu topology but a mixed of cpu and
>> >cache/memory cache topology
>> >
>> >> [0-7]                          (shared level 3 cache )
>> >> [0-1] [2-3][4-5][6-7]   (shared level 2 cache )
>> >
>> >So you don't  bother the intermediate cluster level which is even simpler.
>> >you have to modify generic arch topology so that cpu_coregroup_mask
>> >returns the correct cpu mask directly.
>> >
>> >You will notice a llc_sibling field that is currently used by acpi but
>> >not DT to return llc cpu mask
>> >
>> cpu_topology[].llc_sibling describe the last level cache of whole system,
>> not in the sched_domain.
>>
>> in the above cache topology, llc_sibling is 0xff([0-7]) , it describes
>
>If llc_sibling was 0xff([0-7] on your system, you would have only one level:
>MC[0-7]

Sorry, but I don't get it, why llc_sibling was 0xff([0-7] means MC[0-7]?
In our system(Android), llc_sibling is indeed 0xff([0-7]) , because they 
shared the llc(L3), but we also have two level:
DIE [0-7]
MC [0-3][4-6]
It makes sense, [0-3] are little cores, [4-7] are bit cores, se only up migrate 
when misfit. We won't change it.

>
>> the L3 cache sibling, but sd_llc_id describes the maximum shared cache
>> in sd, which should be [0-1] instead of [0-3].
>
>sd_llc_id describes the last sched_domain with SD_SHARE_PKG_RESOURCES.
>If you want llc to be [0-3] make sure that the
>sched_domain_topology_level array returns the correct cpumask with
>this flag

Acturely, we want sd_llc to be [0-1] [2-3], but if the MC domain don't have
SD_SHARE_PKG_RESOURCES flag, the sd_llc will be [0][1][2][3]. It's not true.

So we must separate sd_llc from sd topology, or the demand cannot be
met in any case under the existing mechanism.

Thanks,
Wang