[Linux-stm32] [PATCH v2 12/13] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13

[Ahmad Fatoum]

Helo Gabriel,

On 03.03.22 14:09, Gabriel FERNANDEZ wrote:
> 
> On 2/25/22 16:13, Ahmad Fatoum wrote:
>> Hello Gabriel,
>>
>> On 25.02.22 14:31, gabriel.fernandez at foss.st.com wrote:
>>> From: Gabriel Fernandez <gabriel.fernandez at foss.st.com>
>>> +    firmware {
>>> +        optee {
>>> +            method = "smc";
>>> +            compatible = "linaro,optee-tz";
>>> +        };
>>> +
>>> +        scmi: scmi {
>>> +            compatible = "linaro,scmi-optee";
>> This compatible doesn't seem to be documented upstream. I am looking at v5.17-rc5.
>> Do you have a reference detailing the difference between this conduit and
>> plain arm,scmi-smc (as used with TF-A on the STM32MP151).
>>
>> Cheers,
>> Ahmad
> 
> Hi
> 
> Ahmad,
> 
> it's on going.
> 
> https://lore.kernel.org/linux-arm-kernel/20211029102118.GG6526@e120937-lin/T/#mf46c83f0aadce3061ee93fa22159405f38d881a0

I've found that thread in the meantime and got some clarification on why a new
transport for OP-TEE was added. One question I still have though is why make
this transport the default for STM32MP13x instead of using SCMI over SMC like
you do for STM32MP15x. OP-TEE could still be made to service SCMI over SMC
and it would allow people employing TF-A as SCMI provider an easier migration
to the newer SoC.

Cheers,
Ahmad

> 
>>
>>> +            #address-cells = <1>;
>>> +            #size-cells = <0>;
>>> +            linaro,optee-channel-id = <0>;
>>> +            shmem = <&scmi_shm>;
>>> +
>>> +            scmi_clk: protocol at 14 {
>>> +                reg = <0x14>;
>>> +                #clock-cells = <1>;
>>> +            };
>>> +
>>> +            scmi_reset: protocol at 16 {
>>> +                reg = <0x16>;
>>> +                #reset-cells = <1>;
>>> +            };
>>> +        };
>>> +    };
>>>       clocks {
>>>           clk_axi: clk-axi {
>>>               #clock-cells = <0>;
>>
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |