[PATCH v11 8/8] PCI: imx6: Do not hide phy driver callbacks and refine the error handling

Richard Zhu hongxing.zhu at nxp.com
Mon Jun 13 23:59:02 PDT 2022


- Move the phy_power_on() to host_init and resume functions from
  imx6_pcie_clk_enable().
- Move the phy_init() to host_init and resume functions from
  imx6_pcie_deassert_core_reset().

Refine the error handling in imx6_pcie_host_init() and
imx6_pcie_resume_noirq() functions accordingly.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 69 +++++++++++++++++++++------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6a55bc395a2c..aa0e81ed6a0e 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -503,14 +503,6 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
 		goto err_ref_clk;
 	}
 
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX8MM:
-		if (phy_power_on(imx6_pcie->phy))
-			dev_err(dev, "unable to power on PHY\n");
-		break;
-	default:
-		break;
-	}
 	/* allow the clocks to stabilize */
 	usleep_range(200, 500);
 	return 0;
@@ -595,10 +587,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	case IMX8MQ:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
 		break;
-	case IMX8MM:
-		if (phy_init(imx6_pcie->phy))
-			dev_err(dev, "waiting for phy ready timeout!\n");
-		break;
 	case IMX7D:
 		reset_control_deassert(imx6_pcie->pciephy_reset);
 
@@ -634,6 +622,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 		usleep_range(200, 500);
 		break;
 	case IMX6Q:		/* Nothing to do */
+	case IMX8MM:
 		break;
 	}
 
@@ -918,15 +907,39 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
 	imx6_pcie_init_phy(imx6_pcie);
+	if (imx6_pcie->phy) {
+		ret = phy_power_on(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy power up failed.\n");
+			return ret;
+		}
+	}
+
 	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
 	if (ret < 0) {
 		dev_err(dev, "pcie host init failed: %d\n", ret);
-		return ret;
+		goto err_phy_off;
+	}
+	if (imx6_pcie->phy) {
+		ret = phy_init(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "waiting for phy ready timeout!\n");
+			goto err_phy_init;
+		}
 	}
 
 	imx6_setup_phy_mpll(imx6_pcie);
 
 	return 0;
+
+err_phy_init:
+	imx6_pcie_clk_disable(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+err_phy_off:
+	if (imx6_pcie->phy)
+		phy_power_off(imx6_pcie->phy);
+	return ret;
 }
 
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
@@ -1031,12 +1044,40 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
 	imx6_pcie_init_phy(imx6_pcie);
-	imx6_pcie_deassert_core_reset(imx6_pcie);
+	if (imx6_pcie->phy) {
+		ret = phy_power_on(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy power up failed.\n");
+			return ret;
+		}
+	}
+
+	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+	if (ret < 0) {
+		dev_err(dev, "pcie deassert core reset failed: %d.\n", ret);
+		goto err_phy_off;
+	} else if (imx6_pcie->phy) {
+		ret = phy_init(imx6_pcie->phy);
+		if (ret) {
+			dev_err(dev, "pcie phy init failed.\n");
+			goto err_phy_init;
+		}
+	}
+
 	dw_pcie_setup_rc(pp);
 	if (imx6_pcie->link_is_up)
 		imx6_pcie_start_link(imx6_pcie->pci);
 
 	return 0;
+
+err_phy_init:
+	imx6_pcie_clk_disable(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+err_phy_off:
+	if (imx6_pcie->phy)
+		phy_power_off(imx6_pcie->phy);
+	return ret;
 }
 #endif
 
-- 
2.25.1




More information about the linux-arm-kernel mailing list