[RESEND v5 3/3] dt-bindings: mediatek: add ethdr definition for mt8195

Rex-BC Chen rex-bc.chen at mediatek.com
Wed Jun 8 08:40:00 PDT 2022


On Wed, 2022-06-08 at 21:45 +0800, Rob Herring wrote:
> On Wed, 08 Jun 2022 12:38:52 +0800, Bo-Chen Chen wrote:
> > From: "Nancy.Lin" <nancy.lin at mediatek.com>
> > 
> > Add vdosys1 ETHDR definition.
> > 
> > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> > Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > Tested-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> >  .../display/mediatek/mediatek,ethdr.yaml      | 188
> > ++++++++++++++++++
> >  1 file changed, 188 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.y
> > aml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Error:
> Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.exa
> mple.dts:71.40-41 syntax error
> FATAL ERROR: Unable to parse input tree
> make[1]: *** [scripts/Makefile.lib:383:
> Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.exa
> mple.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1404: dt_binding_check] Error 2
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/patch/
> 
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 

Hello Rob,

I am not sure why there is this error.
But from my running result: line 71 in mediatek,ethdr.example.dts is
"resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,"

This reset define is in previous patch of this series.
I don't know how to avoid this.

And I also just got this:
./Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.exa
mple.dtb: hdr-engine at 1c114000: mediatek,gce-client-reg:0: [4294967295,
7, 16384, 4096, 4294967295, 7, 20480, 4096, 4294967295, 7, 28672, 4096,
4294967295, 7, 36864, 4096, 4294967295, 7, 40960, 4096, 4294967295, 7,
45056, 4096, 4294967295, 7, 49152, 4096] is too long
        From schema:
./Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yam
l
./Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.exa
mple.dtb: hdr-engine at 1c114000: mediatek,gce-client-reg: [[4294967295,
7, 16384, 4096, 4294967295, 7,
20480, 4096, 4294967295, 7, 28672, 4096, 4294967295, 7, 36864, 4096,
4294967295, 7, 40960, 4096, 4294967295, 7, 45056, 4096, 4294967295, 7,
49152, 4096]] is too short
        From schema:
./Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yam
l

Is there any suggestion?

BRs,
Bo-Chen




More information about the linux-arm-kernel mailing list