[PATCH 1/1] spi: spi-mem: Fix spi_mem_poll_status()

[patrice.chotard at foss.st.com]

From: Patrice Chotard <patrice.chotard at foss.st.com>

In spi_mem_exec_op(), in case cs_gpiod descriptor is set, exec_op()
callback can't be used.
The same must be applied in spi_mem_poll_status(), poll_status()
callback can't be used, we must use the legacy path using
read_poll_timeout().

Tested on STM32mp257c-ev1 specific evaluation board on which a
spi-nand was mounted instead of a spi-nor.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 drivers/spi/spi-mem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index e8de4f5017cd..0c79193d9697 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -808,7 +808,7 @@ int spi_mem_poll_status(struct spi_mem *mem,
 	    op->data.dir != SPI_MEM_DATA_IN)
 		return -EINVAL;
 
-	if (ctlr->mem_ops && ctlr->mem_ops->poll_status) {
+	if (ctlr->mem_ops && ctlr->mem_ops->poll_status && !mem->spi->cs_gpiod) {
 		ret = spi_mem_access_start(mem);
 		if (ret)
 			return ret;
-- 
2.25.1