[PATCH v1 03/14] regulator: dt-bindings: Add interrupts support to TPS65219 PMIC bindings

Rob Herring robh at kernel.org
Wed Jul 20 16:37:25 PDT 2022


On Tue, Jul 19, 2022 at 11:17:31AM +0200, Jerome Neanne wrote:
> Add interrupt properties in PMIC TPS65219 bindings

Why is this a separate patch? Please make your binding complete. Where 
do these interrupts go to?

> 
> Signed-off-by: Jerome Neanne <jneanne at baylibre.com>
> ---
>  .../bindings/regulator/ti,tps65219.yaml       | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> index 2c655432b889..6a60e62a313c 100644
> --- a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> @@ -25,6 +25,17 @@ properties:
>      description: Optional property that indicates that this device is
>        controlling system power.
>  
> +  interrupts:
> +    description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description: Specifies the PIN numbers and Flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 1
> +
>  patternProperties:
>    "^buck[1-3]-supply$":
>      description: Input supply phandle of one regulator.
> @@ -71,12 +82,16 @@ patternProperties:
>  required:
>    - compatible
>    - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
>    - regulators
>  
>  additionalProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>      i2c {
>          #address-cells = <1>;
>          #size-cells = <0>;
> @@ -92,6 +107,13 @@ examples:
>              ldo3-supply = <&vcc_3v3_sys>;
>              ldo4-supply = <&vcc_3v3_sys>;
>  
> +            pinctrl-0 = <&pmic_irq_pins_default>;
> +
> +            interrupt-parent = <&gic500>;
> +            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +
>              regulators {
>                  buck1_reg: buck1 {
>                      regulator-name = "VDD_CORE";
> -- 
> 2.17.1
> 
> 



More information about the linux-arm-kernel mailing list