[PATCH V3 3/7] dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl

[Krzysztof Kozlowski]

On 19/07/2022 07:50, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> i.MX8MP VPU blk ctrl module has similar design as i.MX8MM, so reuse
> the i.MX8MM VPU blk ctrl yaml file. And add description for the items.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml      | 90 +++++++++++++++++--
>  include/dt-bindings/power/imx8mp-power.h      |  4 +
>  2 files changed, 85 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
> index b3fb529b399c..14f92574286f 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
> @@ -30,20 +30,13 @@ properties:
>      maxItems: 4
>  
>    power-domain-names:
> -    items:
> -      - const: bus
> -      - const: g1
> -      - const: g2
> -      - const: h1
> +    maxItems: 4
>  
>    clocks:
>      maxItems: 3
>  
>    clock-names:
> -    items:
> -      - const: g1
> -      - const: g2
> -      - const: h1
> +    maxItems: 3
>  
>  required:
>    - compatible
> @@ -53,6 +46,85 @@ required:
>    - clocks
>    - clock-names
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8mm-vpu-blk-ctrl
> +    then:
> +      properties:
> +        power-domains:
> +          items:
> +            - description: bus power domain
> +            - description: G1 decoder power domain
> +            - description: G2 decoder power domain
> +            - description: H1 encoder power domain
> +
> +        power-domain-names:
> +          items:
> +            - const: bus
> +            - const: g1
> +            - const: g2
> +            - const: h1
> +
> +        clocks:
> +          items:
> +            - description: G1 decoder clk
> +            - description: G2 decoder clk
> +            - description: H1 encoder clk
> +
> +        clock-names:
> +          items:
> +            - const: g1
> +            - const: g2
> +            - const: h1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8mp-vpu-blk-ctrl
> +    then:
> +      properties:
> +        power-domains:
> +          items:
> +            - description: bus power domain
> +            - description: G1 decoder power domain
> +            - description: G2 decoder power domain
> +            - description: VC8000E encoder power domain
> +
> +        power-domain-names:
> +          items:
> +            - const: bus
> +            - const: g1
> +            - const: g2
> +            - const: vc8000e
> +
> +        clocks:
> +          items:
> +            - description: G1 decoder clk
> +            - description: G2 decoder clk
> +            - description: VC8000E encoder clk
> +
> +        clock-names:
> +          items:
> +            - const: g1
> +            - const: g2
> +            - const: vc8000e
> +
> +        interconnects:
> +          items:
> +            - description: G1 decoder interconnect
> +            - description: G2 decoder interconnect
> +            - description: VC8000E encoder interconnect
> +
> +        interconnect-names:
> +          items:
> +            - const: g1
> +            - const: g2
> +            - const: vc8000e

Include interconnects+names in list of all properties and disallow them
for other variants.


Best regards,
Krzysztof