[PATCH v1] i2c: imx: Retry transfer on transient failure

[Francesco Dolcini]

On Wed, Jul 13, 2022 at 03:24:37PM +0200, Oleksij Rempel wrote:
> On Wed, Jul 13, 2022 at 01:57:50PM +0200, Francesco Dolcini wrote:
> > + oleksandr.suvorov at foundries.io
> > 
> > Hello all,
> > 
> > On Tue, Jul 12, 2022 at 12:05:04PM +0200, Francesco Dolcini wrote:
> > > On Tue, Jul 12, 2022 at 11:05:14AM +0200, Uwe Kleine-König wrote:
> > > > In which situations does this help? Please mention these in the
> > > > commit log.
> > > I'll do
> > 
> > I did some investigation on this, unfortunately we have this change
> > laying around since 1 year, it was written by Oleksandr, and in the
> > meantime he moved to a new company. I added him to this email thread, so
> > he can comment in case he remembers more.
> > 
> > We introduced this change while working on OV5640 camera sensor on an
> > apalis-imx6q evaluation board, without this change we had some sporadic
> > i2c communication issues. Unfortunately I do not have any better
> > details.
> > 
> > To me looks like having some (3? 5?) retry as a default is somehow
> > more reasonable than to never retry, not sure if this should be
> > implemented as a default for all the i2c adapters. From what I was able
> > to see that would not be a trivial change (the retry parameter is coming
> > from the i2c_imx driver, there is no obvious way to have a default in
> > the i2c core).
> > 
> > Would it work for you to keep the change as it is (just getting rid
> > of the useless define) and add a little bit more blurb to the commit
> > message to include the various comments collected so far?
> 
> I assume, it is related to reset time or other reason where the camera
> is not responding. In this case, amount of retries would depend on I2C
> CLK speed and host CPU speed.
> 

The retry on the I2C IMX driver would trigger only on tx arbitration
failure, that would be the SDA being tied low by the slave in an
unexpected moment, correct? If the camera does not respond it will just
not ack the transaction and that would not be recovered by the retry
in this change.

Can this just a layout/cabling issue with some noise on the SDA line? We
are talking about somehow long board to board cables with various
signals on it. This is an issue that we had for sure in the past,
however I do have record of this only on a different camera.

Francesco