[PATCH 1/2] pwm: lpc18xx: Convert to use dev_err_probe()

[Uwe Kleine-König]

This has various upsides:
 - It emits the symbolic name of the error code
 - It is silent in the EPROBE_DEFER case and properly sets the defer reason
 - It reduces the number of code lines slightly

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-lpc18xx-sct.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 272e0b5d01b8..9bb2693cece3 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -359,21 +359,19 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(lpc18xx_pwm->base);
 
 	lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
-	if (IS_ERR(lpc18xx_pwm->pwm_clk)) {
-		dev_err(&pdev->dev, "failed to get pwm clock\n");
-		return PTR_ERR(lpc18xx_pwm->pwm_clk);
-	}
+	if (IS_ERR(lpc18xx_pwm->pwm_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk),
+				     "failed to get pwm clock\n");
 
 	ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not prepare or enable pwm clock\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not prepare or enable pwm clock\n");
 
 	lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
 	if (!lpc18xx_pwm->clk_rate) {
-		dev_err(&pdev->dev, "pwm clock has no frequency\n");
-		ret = -EINVAL;
+		ret = dev_err_probe(&pdev->dev,
+				    -EINVAL, "pwm clock has no frequency\n");
 		goto disable_pwmclk;
 	}
 
@@ -423,7 +421,7 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 
 	ret = pwmchip_add(&lpc18xx_pwm->chip);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+		dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
 		goto disable_pwmclk;
 	}
 

base-commit: 394b517585da9fbb2eea2f2103ff47d37321e976
-- 
2.36.1