[PATCH] arm64: dts: broadcom: bcm4908: Fix cpu and timer node

[Florian Fainelli]

On 7/7/2022 7:18 PM, William Zhang wrote:
> Add spin-table enable-method and cpu-release-addr properties for
> cpu0 node. This is required by all ARMv8 SoC. Otherwise some
> bootloader like u-boot can not update cpu-release-addr and linux
> fails to start up secondary cpus.
> 
> Also fix the cpu mask in the interrupts property of the timer node
> for dual core bcm4906 SoC.
> 
> Signed-off-by: William Zhang <william.zhang at broadcom.com>

This looks good, however can you split this into 2 different patches and 
add for the first hunk:

Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear 
R8000P DTS files")

and:

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus 
GT-AC5300 early DTS files")

for the second hunk to the commit message?

Thanks!

> 
> ---
> 
>   arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++
>   arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 ++
>   2 files changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
> index 66023d553524..d084c33d5ca8 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
> @@ -9,6 +9,14 @@ cpus {
>   		/delete-node/ cpu at 3;
>   	};
>   
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
>   	pmu {
>   		compatible = "arm,cortex-a53-pmu";
>   		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> index a4be040a00c0..967d2cd3c3ce 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> @@ -29,6 +29,8 @@ cpu0: cpu at 0 {
>   			device_type = "cpu";
>   			compatible = "brcm,brahma-b53";
>   			reg = <0x0>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x0 0xfff8>;
>   			next-level-cache = <&l2>;
>   		};
>   

-- 
Florian