[PATCH v11 3/6] arm64: dts: allwinner: Add Allwinner H616 .dtsi file
Samuel Holland
samuel at sholland.org
Wed Jul 6 23:30:32 PDT 2022
Hi Andre, Jernej,
On 7/6/22 8:16 AM, Andre Przywara wrote:
> so after seemingly having finished writing this email, I realised that
> this won't really help, as I think this diverts the discussion. And the
> problem has been around for a while, and won't probably be solved easily
> or quickly. I think we agree to disagree here, or we should admit that
> there are different approaches ("bundled firmware" vs. "UEFI"), so in the
> interest of not blocking the H616 series:
>
> Shall I just keep the firmware node? This would work both ways, whereas
> dropping the node would impede the "bundled firmware" approach?
Let me try to sum up the relevant portion of my thoughts (and save the rest for
elsewhere):
The only reason to add the reserved-memory node is to support externally-loaded
DTBs. By adding the node, we are committing to support externally-loaded DTBs on
this SoC.
Upgrading the kernel is not allowed to break boot. If we support
externally-loaded DTBs, that rule extends to DTBs shipped with the kernel.
If we remove the reserved-memory node, the combination of old U-Boot + new
externally-loaded DTB will stop booting (the kernel version is irrelevant).
Therefore, if we add the node, we can never remove it, full stop.
I will (begrudgingly) accept that, as long as the node matches what TF-A
actually generates today. That means, please:
- Drop the label and update the node name
- Reduce the size to 256 KiB, matching (BL31_LIMIT - BL31_BASE)
Regards,
Samuel
More information about the linux-arm-kernel
mailing list