[PATCH] ARM: dts: colibri-imx6ull: fix snvs pinmux group

[Max Krummenacher]

From: Max Krummenacher <max.krummenacher at toradex.com>

A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.

Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.

Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>

---

 arch/arm/boot/dts/imx6ull-colibri.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 623bb7585ad1..577a424b0e1d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -165,7 +165,7 @@
 	atmel_mxt_ts: touchscreen at 4a {
 		compatible = "atmel,maxtouch";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn>;
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
 		reg = <0x4a>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
@@ -330,7 +330,6 @@
 	pinctrl_atmel_conn: atmelconngrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
@@ -683,6 +682,12 @@
 };
 
 &iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
 	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
-- 
2.20.1