[PATCH 0/8] various imx6ul DT fixes

[Alexander Stein]

This patch set fixes several, but not all, dt_binding_check warnings. Some are
missing properties or their format, others address issues regarding to
compatible names. I only touched those where compatibles are stated in the yaml
bindings.
There are several imx6ul compatible names used by imx6ul.dtsi, but which are
not listed in the bindings. Namely:
* "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"
* "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"
* "fsl,imx6ul-gpc", "fsl,imx6q-gpc"
* "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"

Despite GPC, the others are apperently compatible to imx6sx. I'm not sure how
to fix the DTB check warning. Add the imx6ul compatible to bindings and drivers?
Or change the .dtsi to use only the imx6sx compatible.

The GPC on imx6ul apparently does only support power gating for ARM CPU, so
this would require actually a new compatible which supports only 1 domain.

Alexander Stein (8):
  ARM: dts: imx6ul: add missing properties for sram
  ARM: dts: imx6ul: change operating-points to uint32-matrix
  ARM: dts: imx6ul: fix keypad compatible
  ARM: dts: imx6ul: fix adc node compatible
  ARM: dts: imx6ul: remove unsupported adc property
  ARM: dts: imx6ul: fix csi node compatible
  ARM: dts: imx6ul: fix lcdif node compatible
  ARM: dts: imx6ul: fix qspi node compatible

 arch/arm/boot/dts/imx6ul.dtsi | 36 +++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

-- 
2.25.1