[RFC PATCH 3/3] arm64: dts: s32g2: add USDHC support

[Chester Lin]

Add a mmc node to support USDHC on NXP S32G2 platforms.

Signed-off-by: Chester Lin <clin at suse.com>
---
 arch/arm64/boot/dts/freescale/s32g2.dtsi        | 14 ++++++++++++++
 arch/arm64/boot/dts/freescale/s32g274a-evb.dts  |  4 ++++
 arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts |  4 ++++
 3 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 34652d36a9f1..fd073654d6f6 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/s32g2-clock.h>
 
 / {
 	compatible = "nxp,s32g2";
@@ -135,6 +136,19 @@ uart2: serial at 402bc000 {
 			status = "disabled";
 		};
 
+		usdhc0: mmc at 402f0000 {
+			compatible = "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&scmi_clks S32G2_SCMI_CLK_USDHC_MODULE>,
+				 <&scmi_clks S32G2_SCMI_CLK_USDHC_AHB>,
+				 <&scmi_clks S32G2_SCMI_CLK_USDHC_CORE>;
+			clock-names = "ipg", "ahb", "per";
+			no-1-8-v;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller at 50800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x50800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index 9118d8d2ee01..89428f1883d9 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -32,3 +32,7 @@ memory at 80000000 {
 &uart0 {
 	status = "okay";
 };
+
+&usdhc0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index e05ee854cdf5..30eae51121de 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -38,3 +38,7 @@ &uart0 {
 &uart1 {
 	status = "okay";
 };
+
+&usdhc0 {
+	status = "okay";
+};
-- 
2.33.1