[PATCH v5 3/4] arm64: dts: qcom: sm6125: Add apps_smmu with streamID to SDHCI 1/2 nodes

[Marijn Suijten]

When enabling the APPS SMMU the mainline driver reconfigures the SMMU
from its bootloader configuration, losing the stream mapping for (among
which) the SDHCI hardware and breaking its ADMA feature.  This feature
can be disabled with:

    sdhci.debug_quirks=0x40

But it is of course desired to have this feature enabled and working
through the SMMU.

Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Reviewed-by: Martin Botka <martin.botka at somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 347665c2067c..32dd172ea104 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -468,6 +468,7 @@ sdhc_1: mmc at 4744000 {
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x160 0x0>;
 
 			power-domains = <&rpmpd SM6125_VDDCX>;
 
@@ -494,6 +495,7 @@ sdhc_2: mmc at 4784000 {
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x180 0x0>;
 
 			pinctrl-0 = <&sdc2_on_state>;
 			pinctrl-1 = <&sdc2_off_state>;
-- 
2.39.0