[PATCH v1] arm64: dts: verdin-imx8mp: add pcie support

[Lucas Stach]

Hi Marcel,

Am Mittwoch, dem 14.12.2022 um 07:13 +0100 schrieb Marcel Ziswiler:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> Add PCIe support on the Verdin iMX8M Plus.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> ---
> This has successfully been tested with Lucas' imx8mp-hsio-blk-ctrl high
> performance PLL clock exposure patch set [1] a later version thereof
> hopefully may land together with my humble patch. Thanks!
> 
> [1] https://lore.kernel.org/all/20221213160112.1900410-1-l.stach@pengutronix.de/
> 
>  .../dts/freescale/imx8mp-verdin-dahlia.dtsi   |  9 +++++++-
>  .../boot/dts/freescale/imx8mp-verdin.dtsi     | 22 ++++++++++++++++++-
>  2 files changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> index 80db1ad7c230..56b0e4b865c9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> @@ -67,7 +67,14 @@ &i2c4 {
>  	/* TODO: Audio Codec */
>  };
>  
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> +	status = "okay";
> +};
> +
> +&pcie_phy {
> +	status = "okay";
> +};
>  
>  /* Verdin PWM_1 */
>  &pwm1 {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> index 6a1890a4b5d8..f3a46f4caf49 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> @@ -749,7 +749,27 @@ eeprom_carrier_board: eeprom at 57 {
>  	};
>  };
>  
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> +	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
> +	assigned-clock-rates = <10000000>;
> +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";

Now that I see this, I realize that those clocks and assignments could
move into imx8mp.dtsi. I doubt that anyone would want to configure
those clocks in a different way. The real difference between boards is
the PCIe PHY reference clock and those differences are fully contained
in the PHY node.

Regards,
Lucas

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie>;
> +	/* PCIE_1_RESET# (SODIMM 244) */
> +	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pcie_phy {
> +	clocks = <&hsio_blk_ctrl>;
> +	clock-names = "ref";
> +	fsl,clkreq-unsupported;
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> +};
>  
>  /* Verdin PWM_1 */
>  &pwm1 {