[PATCH v3 7/9] arm64: dts: librem5: fix touchscreen reset GPIO polarity

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at theobroma-systems.com>

The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.

Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5bb..b038300812b1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -542,7 +542,7 @@ touchscreen at 5d {
 		pinctrl-0 = <&pinctrl_ts>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <720>;
 		touchscreen-size-y = <1440>;

-- 
b4 0.10.1