[PATCH v2 2/5] dt-bindings: net: add schema for NXP S32CC dwmac glue driver

[Chester Lin]

Hi Krzysztof,

On Thu, Dec 01, 2022 at 11:18:57AM +0100, Krzysztof Kozlowski wrote:
> On 30/11/2022 18:33, Andreas Färber wrote:
> > Hi Krysztof,
> > 
> > Am 30.11.22 um 16:51 schrieb Krzysztof Kozlowski:
> >> On 28/11/2022 06:49, Chester Lin wrote:
> >>> Add the DT schema for the DWMAC Ethernet controller on NXP S32 Common
> >>> Chassis.
> >>>
> >>> Signed-off-by: Jan Petrous <jan.petrous at nxp.com>
> >>> Signed-off-by: Chester Lin <clin at suse.com>
> >>
> >> Thank you for your patch. There is something to discuss/improve.
> >>

Thanks for taking time to review this patch!

> >>> ---
> >>>
> >>> Changes in v2:
> >>>    - Fix schema issues.
> >>>    - Add minItems to clocks & clock-names.
> >>>    - Replace all sgmii/SGMII terms with pcs/PCS.
> >>>
> >>>   .../bindings/net/nxp,s32cc-dwmac.yaml         | 135 ++++++++++++++++++
> >>>   1 file changed, 135 insertions(+)
> >>>   create mode 100644 Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml
> >>> new file mode 100644
> >>> index 000000000000..c6839fd3df40
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml
> > [...]
> >>> +properties:
> >>> +  compatible:
> >>> +    enum:
> >>> +      - nxp,s32cc-dwmac
> >>> +
> >>> +  reg:
> >>> +    items:
> >>> +      - description: Main GMAC registers
> >>> +      - description: S32 MAC control registers
> >>> +
> >>> +  dma-coherent: true
> >>> +
> >>> +  clocks:
> >>> +    minItems: 5
> >>
> >> Why only 5 clocks are required? Receive clocks don't have to be there?
> >> Is such system - only with clocks for transmit - usable?
> 
> Any comments here? If not, drop minItems.
> 
> >>
> >>> +    items:
> >>> +      - description: Main GMAC clock
> >>> +      - description: Peripheral registers clock
> >>> +      - description: Transmit PCS clock
> >>> +      - description: Transmit RGMII clock
> >>> +      - description: Transmit RMII clock
> >>> +      - description: Transmit MII clock
> >>> +      - description: Receive PCS clock
> >>> +      - description: Receive RGMII clock
> >>> +      - description: Receive RMII clock
> >>> +      - description: Receive MII clock
> >>> +      - description:
> >>> +          PTP reference clock. This clock is used for programming the
> >>> +          Timestamp Addend Register. If not passed then the system
> >>> +          clock will be used.
> >>> +
> >>> +  clock-names:
> >>> +    minItems: 5
> >>> +    items:
> >>> +      - const: stmmaceth
> >>> +      - const: pclk
> >>> +      - const: tx_pcs
> >>> +      - const: tx_rgmii
> >>> +      - const: tx_rmii
> >>> +      - const: tx_mii
> >>> +      - const: rx_pcs
> >>> +      - const: rx_rgmii
> >>> +      - const: rx_rmii
> >>> +      - const: rx_mii
> >>> +      - const: ptp_ref
> >>> +
> >>> +  tx-fifo-depth:
> >>> +    const: 20480
> >>> +
> >>> +  rx-fifo-depth:
> >>> +    const: 20480
> >>> +
> >>> +required:
> >>> +  - compatible
> >>> +  - reg
> >>> +  - tx-fifo-depth
> >>> +  - rx-fifo-depth
> >>> +  - clocks
> >>> +  - clock-names
> >>> +
> >>> +unevaluatedProperties: false
> >>> +
> >>> +examples:
> >>> +  - |
> >>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>> +    #include <dt-bindings/interrupt-controller/irq.h>
> >>> +
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_AXI
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_TX_PCS
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_TX_RGMII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_TX_RMII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_TX_MII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_RX_PCS
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_RX_RGMII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_RX_RMII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_RX_MII
> >>> +    #define S32GEN1_SCMI_CLK_GMAC0_TS
> >>
> >> Why defines? Your clock controller is not ready? If so, just use raw
> >> numbers.
> > 
> > Please compare v1: There is no Linux-driven clock controller here but 
> > rather a fluid SCMI firmware interface. Work towards getting clocks into 
> > a kernel-hosted .dtsi was halted in favor of (downstream) TF-A, which 
> > also explains the ugly examples here and for pinctrl.
> 
> This does not explain to me why you added defines in the example. Are
> you saying these can change any moment?
> 

Actually these GMAC-related SCMI clock IDs changed once in NXP's downstream TF-A,
some redundant TS clock IDs were removed and the rest of clock IDs were all moved
forward. Apart from GMAC-related IDs, some other clock IDs were also appended
in both base-clock IDs and platform-specific clock IDs [The first plat ID =
The last base ID + 1]. Due to the current design of the clk-scmi driver and the
SCMI clock protocol, IIUC, it's better to keep all clock IDs in sequence without
a blank in order to avoid query miss, which could affect the probe speed.

> > 
> > Logically there are only 5 input clocks; however due to SCMI not 
> > supporting re-parenting today, some clocks got duplicated at SCMI level. 
> > Andrew appeared to approve of that approach. I still dislike it but 
> > don't have a better proposal that would work today. So the two values 
> > above indeed seem wrong and should be 11 rather than 5.
> 
> You should rather fix firmware then create some incorrect bindings as a
> workaround...
> 
> Best regards,
> Krzysztof
>