[PATCH v5 07/10] dt-bindings: phy: Add Cadence HDP-TX DP PHY

[Rob Herring]

On Mon, Nov 28, 2022 at 03:36:15PM +0800, Sandor Yu wrote:
> Add bindings for Cadence HDP-TX DisplayPort PHY.
> 
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
>  .../bindings/phy/cdns,hdptx-dp-phy.yaml       | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/cdns,hdptx-dp-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/cdns,hdptx-dp-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,hdptx-dp-phy.yaml
> new file mode 100644
> index 000000000000..f4f741150c12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/cdns,hdptx-dp-phy.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/cdns,hdptx-dp-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence HDP-TX(HDMI/DisplayPort) PHY for DisplayPort protocol
> +
> +maintainers:
> +  - Sandor Yu <sandor.yu at nxp.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,hdptx-dp-phy

Again, name based on SoC and SoC vendor.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PHY reference clock.
> +      - description: APB clock.
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: apb
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  cdns,num-lanes:

There is a standard way to define the number of lanes. That goes in 
output endpoint for the DP node. Not that convenient to the phy, but the 
information is already there, don't duplicate it.

> +    description:
> +      Number of lanes.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 3, 4]
> +    default: 4
> +
> +  cdns,max-bit-rate:

Same with this.

> +    description:
> +      Maximum DisplayPort link bit rate to use, in Mbps
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [2160, 2430, 2700, 3240, 4320, 5400]
> +    default: 5400
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/phy/phy.h>
> +    dp_phy: phy at 32c00000 {
> +        compatible = "cdns,hdptx-dp-phy";
> +        reg = <0x32c00000 0x100000>;
> +        #phy-cells = <0>;
> +        clocks = <&hdmi_phy_27m>, <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> +        clock-names = "ref", "apb";
> +        cdns,num-lanes = <4>;
> +        cdns,max-bit-rate = <5400>;
> +    };
> -- 
> 2.34.1
> 
>