[PATCH v4 0/4] mainline Protonic PRTT1x boards

[Oleksij Rempel]

changes v4:
- reorder prtt1X compatible again
- remove spaces in stm32mp151a-prtt1c.dts

changes v3:
- add silabs,wfx compatible
- move spi pin configuration to stm32mp15-pinctrl.dtsi
- move prtt1X compatible in alphabetical order
- add watchdog and thermal nodes

changes v2:
- cleanup mmc nodes
- disabled dma for uart4 (this is console interface and it should work
  as simple as possible)

Oleksij Rempel (4):
  dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
    boards
  dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
  ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
  ARM: dts: stm32: add support for Protonic PRTT1x boards

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
 .../staging/net/wireless/silabs,wfx.yaml      |   1 +
 arch/arm/boot/dts/Makefile                    |   3 +
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  15 +
 arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
 arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 304 ++++++++++++++++++
 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 229 +++++++++++++
 arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
 8 files changed, 675 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts

-- 
2.30.2