[PATCH] ARM: dts: imx6sl: Add a label for the cpu node
Fabio Estevam
festevam at gmail.com
Fri Apr 22 12:55:37 PDT 2022
Add a label for the cpu node, so that board devicetree files can
reference to the CPU node.
This is useful for describing a PMIC voltage that supplies the CPU
voltage.
For example:
&cpu0 {
cpu-supply = <&sw1_reg>;
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
arch/arm/boot/dts/imx6sl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c7d907c5c352..06a515121dfc 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -50,7 +50,7 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ cpu0: cpu at 0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0x0>;
--
2.25.1
More information about the linux-arm-kernel
mailing list