[PATCH 4/5] dt-bindings: mmc: Add Broadcom optional sdio_freq clock

[Krzysztof Kozlowski]

On 21/04/2022 20:28, Kamal Dasu wrote:
> The 72116B0 has improved SDIO controllers that allow the max clock
> rate to be increased from a max of 100MHz to a max of 150MHz.
> Optional "sdio_freq" clock is used to drive the bus clock if present
> optional property "clock-frequency" specifies a base clock frequency
> in Hz that overrides the base clock frequency in the CAPS registers.
> 
> Signed-off-by: Kamal Dasu <kdasu.kdev at gmail.com>
> ---
>  .../bindings/mmc/brcm,sdhci-brcmstb.yaml      | 29 +++++++++++++++----
>  1 file changed, 24 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> index dccd5ad96981..1b45a918400a 100644
> --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> @@ -10,8 +10,6 @@ maintainers:
>    - Al Cooper <alcooperx at gmail.com>
>    - Florian Fainelli <f.fainelli at gmail.com>
>  
> -allOf:
> -  - $ref: mmc-controller.yaml#
>  
>  properties:
>    compatible:
> @@ -42,23 +40,44 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 1
> -    description:
> -      handle to core clock for the sdhci controller.
> +    minItems: 1
> +    items:
> +      - description: handle to core clock for the sdhci controller
> +      - description: improved 150Mhz clock for sdhci controller (Optional clock)
>  
>    clock-names:
> +    minItems: 1
>      items:
>        - const: sw_sdio
> +      - const: sdio_freq # Optional clock
> +
> +  clock-frequency:
> +    description: Should be the frequency (in Hz) of the base controller clock
> +    minimum: 400000
> +    maximum: 150000000

Why do you need this property? The mmc-controller.yaml already has
max-frequency, so maybe that suits your needs?


Best regards,
Krzysztof