[PATCH 2/8] dt-bindings: nvmem: sfp: Add clock properties

[Michael Walle]

Am 2022-04-21 19:56, schrieb Sean Anderson:
> To program fuses, it is necessary to set the fuse programming time. 
> This
> is determined based on the value of the platform clock. Add a clock
> property.

For some context: Sean was adding the SFP support in u-boot and
I referred him to this binding. I didn't need the clock to just
read the data. But Sean is right, we need the clock for the
programming. I was unaware of that. The binding is still yet to
be released with v5.18, thus I think it is still possible to make
the clock mandatory.

> Signed-off-by: Sean Anderson <sean.anderson at seco.com>

Fixes: 6f9817cdcc82 ("dt-bindings: nvmem: add fsl,layerscape-sfp 
binding")

-michael

> ---
> 
>  .../bindings/nvmem/fsl,layerscape-sfp.yaml         | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git
> a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
> b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
> index b7798e903191..54086f50157d 100644
> --- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
> @@ -24,15 +24,29 @@ properties:
>    reg:
>      maxItems: 1
> 
> +  clocks:
> +    maxItems: 1
> +    description:
> +      The SFP clock. Typically, this is the platform clock divided by 
> 4.
> +
> +  clock-names:
> +    const: sfp
> +
>  required:
>    - compatible
>    - reg
> +  - clock-names
> +  - clocks
> 
>  unevaluatedProperties: false
> 
>  examples:
>    - |
> +    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
>      efuse at 1e80000 {
>          compatible = "fsl,ls1028a-sfp";
>          reg = <0x1e80000 0x8000>;
> +        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> +                            QORIQ_CLK_PLL_DIV(4)>;
> +        clock-names = "sfp";
>      };