[PATCH 6/6] ARM: dts: bcm283x: Align ETH_CLK GPIO line name

[Stefan Wahren]

From: Phil Elwell <phil at raspberrypi.com>

The GPIO line name ETHCLK is not aligned with the other signals like
WIFI_CLK. Recently this has been fixed in the vendor tree, so upstream
this change.

Signed-off-by: Phil Elwell <phil at raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 7b7c363e5ee8..248feb2ed23d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -82,7 +82,7 @@ &gpio {
 			  "CAM_GPIO0", /* GPIO41 */
 			  "", /* GPIO42 */
 			  "", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
+			  "ETH_CLK", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index c824a2cea02e..3635502b1e0a 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -82,7 +82,7 @@ &gpio {
 			  "CAM_GPIO0",
 			  "SMPS_SCL",
 			  "SMPS_SDA",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "PWM1_OUT",
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index fd4ac6f2d077..ec721d323ac5 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -109,7 +109,7 @@ &gpio {
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 00ea439d601d..fb6a417d73e7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -102,7 +102,7 @@ &gpio {
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
-- 
2.25.1