[PATCH 3/7] ARM: dts: qcom: sdx65: Add support for SDHCI controller

[Rohit Agarwal]

Add devicetree support for SDHCI controller found in Qualcomm SDX65
platform. The SDHCI controller is based on the MSM SDHCI v5 IP.

Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 365df74..632ac78 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -168,6 +168,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		sdhc_1: sdhci at 8804000 {
+			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			reg-names = "hc_mem";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				<&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller at b210000 {
 			compatible = "qcom,sdx65-pdc", "qcom,pdc";
 			reg = <0xb210000 0x10000>;
-- 
2.7.4