[PATCH V4 1/3] dt-bindings: mmc: imx-esdhc: Update compatible fallbacks

[Krzysztof Kozlowski]

On 10/04/2022 21:35, Adam Ford wrote:
> The SDHC controller in the imx8mn and imx8mp have the same controller
> as the imx8mm which is slightly different than that of the imx7d.
> 
> Using the fallback of the imx8mm enables the controllers to support
> HS400-ES which is not available on the imx7d. After discussion with NXP,
> it turns out that the imx8qm should fall back to the imx8qxp, because
> those have some additional flags not present in the imx8mm.
> 
> Mark the current state of the fallbacks as deprecated, and add the
> proper fallbacks so in the future, the deprecated combination can be
> removed and prevent any future devices from using the wrong fallback.
> 
> Suggested-by: haibo.chen at nxp.com
> Signed-off-by: Adam Ford <aford173 at gmail.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>


Best regards,
Krzysztof