[PATCH v5 4/4] dt-bindings: dsp: fsl: update binding document for remote proc driver

[Shengjiu Wang]

Hi Rob

On Thu, Sep 30, 2021 at 6:40 AM Rob Herring <robh at kernel.org> wrote:
>
> On Sun, Sep 26, 2021 at 11:07:10AM +0800, Shengjiu Wang wrote:
> > As there are two drivers for DSP on i.MX, one is for sound open
> > firmware, another is for remote processor framework. In order to
> > distinguish two kinds of driver, defining different compatible strings.
> >
> > For remote proc driver, the properties firmware-name and fsl,dsp-ctrl
> > are needed and the mailbox channel is different with SOF.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > Acked-by: Daniel Baluta <daniel.baluta at nxp.com>
> > ---
> >  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 81 +++++++++++++++++--
> >  1 file changed, 75 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > index 7afc9f2be13a..51ea657f6d42 100644
> > --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > @@ -8,6 +8,7 @@ title: NXP i.MX8 DSP core
> >
> >  maintainers:
> >    - Daniel Baluta <daniel.baluta at nxp.com>
> > +  - Shengjiu Wang <shengjiu.wang at nxp.com>
> >
> >  description: |
> >    Some boards from i.MX8 family contain a DSP core used for
> > @@ -19,6 +20,10 @@ properties:
> >        - fsl,imx8qxp-dsp
> >        - fsl,imx8qm-dsp
> >        - fsl,imx8mp-dsp
> > +      - fsl,imx8qxp-hifi4
> > +      - fsl,imx8qm-hifi4
> > +      - fsl,imx8mp-hifi4
> > +      - fsl,imx8ulp-hifi4
> >
> >    reg:
> >      maxItems: 1
> > @@ -28,37 +33,63 @@ properties:
> >        - description: ipg clock
> >        - description: ocram clock
> >        - description: core clock
> > +      - description: debug interface clock
> > +      - description: message unit clock
> > +    minItems: 3
> > +    maxItems: 5
>
> Don't need maxItems.

Ok, I will update it.

>
> >
> >    clock-names:
> >      items:
> >        - const: ipg
> >        - const: ocram
> >        - const: core
> > +      - const: debug
> > +      - const: mu
> > +    minItems: 3
> > +    maxItems: 5
>
> ditto

Ok, I will update it.

>
> >
> >    power-domains:
> >      description:
> >        List of phandle and PM domain specifier as documented in
> >        Documentation/devicetree/bindings/power/power_domain.txt
> > +    minItems: 1
>
> This is curious. The h/w sometimes has fewer power domains?

On i.MX8QM/8QXP,  there are independent power domains for DSP core,
DSP's RAM and DSP's MU.
But on i.MX8MP, all these DSP components are in same audio subsystem
There is only one power domain for whole audio subsystem,  when
power on audio subsystem, the DSP's components are powered on also.

So the number of power domain depends on how the DSP component
integrated in SoC.

Best regards
Wang Shengjiu