[PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description
zhiyong.tao
zhiyong.tao at mediatek.com
Wed Sep 29 18:54:44 PDT 2021
On Wed, 2021-09-29 at 16:47 -0500, Rob Herring wrote:
> On Fri, Sep 24, 2021 at 04:06:29PM +0800, Zhiyong Tao wrote:
> > For supporting SI units in "bias-pull-down" & "bias-pull-up",
> > change pull up/down description
> > and add "mediatek,rsel_resistance_in_si_unit" description.
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
> > ---
> > .../bindings/pinctrl/pinctrl-mt8195.yaml | 86
> > ++++++++++++++++++-
> > 1 file changed, 84 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml
> > index 2f12ec59eee5..5f642bef72af 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > @@ -49,6 +49,12 @@ properties:
> > description: The interrupt outputs to sysirq.
> > maxItems: 1
> >
> > + mediatek,rsel_resistance_in_si_unit:
>
> s/_/-/
Hi Rob,
what do you mean?
>
> > + type: boolean
> > + description: |
> > + Identifying i2c pins pull up/down type which is RSEL. It can
> > support
> > + RSEL define or si unit value(ohm) to set different
> > resistance.
>
> Aren't the RSEL and ohms disjoint values? 0-207 for RSEL and >1000
> for
> ohms. Why is this property even needed.
>
No, they aren't.
As we talked in v11. "mediatek,rsel_resistance_in_si_unit" is only a
flag.
Hi ChenYu,
In the next version, we provide a solution which we discussed internal
to avoid value clashes.
The solution:
1. We will keep the define "MTK_PULL_SET_RSEL_000 200". It won't
change.
2. We will add a property in pio dtsi node, for example,
the property name is "rsel_resistance_in_si_unit".
We will add a flag "rsel_si_unit" in pinctrl device.
in probe function, we will identify the property name
"rsel_resistance_in_si_unit" to set the flag "rsel_si_unit" value.
So it can void value clashes.
3.We will provide the define "MTK_PULL_SET_RSEL_000 200" and si unit
two solution. users can support which solution by add property
"rsel_resistance_in_si_unit" in dts node or not.
Thanks
> > +
> > #PIN CONFIGURATION NODES
> > patternProperties:
> > '-pins$':
> > @@ -85,9 +91,85 @@ patternProperties:
> > 2/4/6/8/10/12/14/16mA in mt8195.
> > enum: [0, 1, 2, 3, 4, 5, 6, 7]
> >
> > - bias-pull-down: true
> > + bias-pull-down:
> > + description: |
> > + For pull down type is normal, it don't need add RSEL &
> > R1R0 define
> > + and resistance value.
> > + For pull down type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > + set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > + define in mt8195.
> > + For pull down type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > + to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > + It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > + define in mt8195. It can also support resistance
> > value(ohm) "75000" & "5000" in mt8195.
> > + oneOf:
>
> Because of the indentation, this is all just part of 'description'.
Can you help to give some suggestion to fix it?
>
> > + - enum: [100, 101, 102, 103]
> > + - description: mt8195 pull down PUPD/R0/R1 type define
> > value.
>
> This entry is always true.
why is it always true? we only get define value.
"100~104" are means that "#define MTK_PUPD_SET_R1R0_10 102" in
include/dt-bindings/pinctrl/mt65xx.h.
>
> > + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
>
> Are these supposed to be hex?
yes, it is patch 1/5 define "#define MTK_PULL_SET_RSEL_000 200".
>
> > + - description: mt8195 pull down RSEL type define
> > value.
>
> And so is this one. That makes 'oneOf' always false.
why is it always false? we only get the si unit value.
>
> > + - enum: [75000, 5000]
> > + - description: mt8195 pull down RSEL type si unit
> > value(ohm).
> > +
> > + An example of using RSEL define:
> > + pincontroller {
> > + i2c0_pin {
> > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > + bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> > + };
> > + };
> > + An example of using si unit resistance value(ohm):
> > + &pio {
> > + mediatek,rsel_resistance_in_si_unit;
> > + }
> > + pincontroller {
> > + i2c0_pin {
> > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > + bias-pull-down = <75000>;
> > + };
> > + };
> >
> > - bias-pull-up: true
> > + bias-pull-up:
> > + description: |
> > + For pull up type is normal, it don't need add RSEL &
> > R1R0 define
> > + and resistance value.
> > + For pull up type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > + set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > + define in mt8195.
> > + For pull up type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > + to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > + It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > + define in mt8195. It can also support resistance
> > value(ohm)
> > + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
> > "10000" & "75000" in mt8195.
> > + oneOf:
> > + - enum: [100, 101, 102, 103]
> > + - description: mt8195 pull up PUPD/R0/R1 type define
> > value.
> > + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> > + - description: mt8195 pull up RSEL type define value.
> > + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000,
> > 75000]
> > + - description: mt8195 pull up RSEL type si unit
> > value(ohm).
>
> Same issues here.
>
> > + An example of using RSEL define:
> > + pincontroller {
> > + i2c0_pin {
> > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > + bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> > + };
> > + };
> > + An example of using si unit resistance value(ohm):
> > + &pio {
> > + mediatek,rsel_resistance_in_si_unit;
> > + }
> > + pincontroller {
> > + i2c0_pin {
> > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > + bias-pull-up = <1000>;
> > + };
> > + };
> >
> > bias-disable: true
> >
> > --
> > 2.25.1
> >
> >
More information about the linux-arm-kernel
mailing list