[PATCH 07/14] KVM: Don't block+unblock when halt-polling is successful
Sean Christopherson
seanjc at google.com
Tue Sep 28 09:21:12 PDT 2021
On Tue, Sep 28, 2021, Marc Zyngier wrote:
> On Mon, 27 Sep 2021 18:28:14 +0100,
> Sean Christopherson <seanjc at google.com> wrote:
> >
> > On Sun, Sep 26, 2021, Marc Zyngier wrote:
> > > On Sun, 26 Sep 2021 07:27:28 +0100,
> > > Paolo Bonzini <pbonzini at redhat.com> wrote:
> > > >
> > > > On 25/09/21 11:50, Marc Zyngier wrote:
> > > > >> there is no need for arm64 to put/load
> > > > >> the vGIC as KVM hasn't relinquished control of the vCPU in any way.
> > > > >
> > > > > This doesn't mean that there is no requirement for any state
> > > > > change. The put/load on GICv4 is crucial for performance, and the VMCR
> > > > > resync is a correctness requirement.
> >
> > Ah crud, I didn't blame that code beforehand, I simply assumed
> > kvm_arch_vcpu_blocking() was purely for the blocking/schedule()
> > sequence. The comment in arm64's kvm_arch_vcpu_blocking() about
> > kvm_arch_vcpu_runnable() makes more sense now too.
> >
> > > > I wouldn't even say it's crucial for performance: halt polling cannot
> > > > work and is a waste of time without (the current implementation of)
> > > > put/load.
> > >
> > > Not quite. A non-V{LPI,SGI} could still be used as the a wake-up from
> > > WFI (which is the only reason we end-up on this path). Only LPIs (and
> > > SGIs on GICv4.1) can be directly injected, meaning that SPIs and PPIs
> > > still follow the standard SW injection model.
> > >
> > > However, there is still the ICH_VMCR_EL2 requirement (to get the
> > > up-to-date priority mask and group enable bits) for SW-injected
> > > interrupt wake-up to work correctly, and I really don't want to save
> > > that one eagerly on each shallow exit.
> >
> > IIUC, VMCR is resident in hardware while the guest is running, and
> > KVM needs to retrieve the VMCR when processing interrupts to
> > determine if a interrupt is above the priority threshold. If that's
> > the case, then IMO handling the VMCR via an arch hook is
> > unnecessarily fragile, e.g. any generic call that leads to
> > kvm_arch_vcpu_runnable() needs to know that arm64 lazily retrieves a
> > guest register.
>
> Not quite. We only need to retrieve the VMCR if we are in a situation
> where we need to trigger a wake-up from WFI at the point where we have
> not done a vcpu_put() yet. All the other cases where the interrupt is
> injected are managed by the HW. And the only case where
> kvm_arch_vcpu_runnable() gets called is when blocking.
>
> I also don't get why a hook would be fragile, as long as it has well
> defined semantics.
Generic KVM should not have to know that a seemingly benign arch hook,
kvm_arch_vcpu_runnable(), cannot be safely called without first calling another
arch hook. E.g. I suspect there's a (benign?) race in kvm_vcpu_on_spin(). If
the loop is delayed between checking rcuwait_active() and vcpu_dy_runnable(),
and the target vCPU is awakened during that period, KVM can call
kvm_arch_vcpu_runnable() while the vCPU is running.
It's kind of a counter-example to my below suggestion as putting the vGIC would
indeed lead to state corruption if the vCPU is running, but I would argue that
arm64 should override kvm_arch_dy_runnable() so that its correctness is guaranteed,
e.g. by not calling kvm_arch_vcpu_runnable() if the vCPU is already running.
> > A better approach for VMCR would be to retrieve the value from
> > hardware on-demand, e.g. via a hook in vgic_get_vmcr(), so that it's all but
> > impossible to have bugs where KVM is working with a stale VMCR, e.g.
> >
> > diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
> > index 48c6067fc5ec..0784de0c4080 100644
> > --- a/arch/arm64/kvm/vgic/vgic-mmio.c
> > +++ b/arch/arm64/kvm/vgic/vgic-mmio.c
> > @@ -828,6 +828,13 @@ void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
> >
> > void vgic_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
> > {
> > + if (!vcpu->...->vmcr_available) {
> > + preempt_disable();
> > + kvm_vgic_vmcr_sync(vcpu);
> > + preempt_enable();
> > + vcpu->...->vmcr_available = true;
> > + }
> > +
>
> But most of the uses of vgic_get_vmcr() are in contexts where the vcpu
> isn't running at all (such as save/restore). It really only operates
> on the shadow state, and what you have above will only lead to state
> corruption.
Ignoring the kvm_arch_dy_runnable() case for the moment, how would it lead to
corruption? The idea is that the 'vmcr_available' flag would be cleared when the
vCPU is run, i.e. it tracks whether or not the shadow state may be stale.
> > if (kvm_vgic_global_state.type == VGIC_V2)
> > vgic_v2_get_vmcr(vcpu, vmcr);
> > else
> >
> >
> > Regarding vGIC v4, does KVM require it to be resident in hardware
> > while the vCPU is loaded?
>
> It is a requirement. Otherwise, we end-up with an inconsistent state
> between the delivery of doorbells and the state of the vgic.
For my own understanding, does KVM require it to be resident in hardware while
the vCPU is loaded but _not_ running? What I don't fully understand is how KVM
can safely load/put the vCPU if that true, i.e. wouldn't there always be a window
for badness?
> Also, reloading the GICv4 state can be pretty expensive (multiple MMIO
> accesses), which is why we really don't want to do that on the hot path
> (kvm_arch_vcpu_ioctl_run() *is* a hot path).
I wasn't suggesting to reload GICv4 on every entry, it would only be reloaded
if it was put between vcpu_load() and entry to the guest.
> > If not, then we could do something like
> > this, which would eliminate the arch hooks entirely if the VMCR is
> > handled as above.
...
> > @@ -813,6 +787,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
> > */
> > preempt_disable();
> >
> > + /*
> > + * Reload vGIC v4 if necessary, as it may be put on-demand so
> > + * that KVM can detect directly injected interrupts, e.g. when
> > + * determining if the vCPU is runnable due to a pending event.
> > + */
> > + vgic_v4_load(vcpu);
>
> You'd need to detect that a previous put has been done.
Not that it will likely matter, but doesn't the its_vpe.resident check automatically
handle this?
> But overall, it puts the complexity at the wrong place. WFI (aka
> kvm_vcpu_block) is the place where we want to handle this synchronisation,
> and not the run loop.
>
> Instead of having a well defined interface with the blocking code
> where we implement the required synchronisation, you spray the vgic
> crap all over, and it becomes much harder to reason about it. Guess
> what, I'm not keen on it.
My objection to the arch hooks is that, from generic KVM's perspective, the
direct dependency is not on blocking, it's on calling kvm_arch_vcpu_runnable().
That's why I suggested handling this by tracking whether or not the VMCR is
up-to-date/stale, as it allows generic KVM to safely call kvm_arch_vcpu_runnable()
whenever the vCPU is loaded.
I don't have a strong opinion on arm64 preferring the sync to be specific to
WFI, but if that's the case then IMO this should be handled fully in arm64, e.g.
a patch like so (or with a wrapper around the call to kvm_vcpu_block() if we
want to guard against future calls into generic KVM)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index fe102cd2e518..312f3acd3ca3 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -367,27 +367,12 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
{
- /*
- * If we're about to block (most likely because we've just hit a
- * WFI), we need to sync back the state of the GIC CPU interface
- * so that we have the latest PMR and group enables. This ensures
- * that kvm_arch_vcpu_runnable has up-to-date data to decide
- * whether we have pending interrupts.
- *
- * For the same reason, we want to tell GICv4 that we need
- * doorbells to be signalled, should an interrupt become pending.
- */
- preempt_disable();
- kvm_vgic_vmcr_sync(vcpu);
- vgic_v4_put(vcpu, true);
- preempt_enable();
+
}
void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
{
- preempt_disable();
- vgic_v4_load(vcpu);
- preempt_enable();
+
}
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 275a27368a04..9870e824a27e 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -95,8 +95,28 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu)
} else {
trace_kvm_wfx_arm64(*vcpu_pc(vcpu), false);
vcpu->stat.wfi_exit_stat++;
+
+ /*
+ * Sync back the state of the GIC CPU interface so that we have
+ * the latest PMR and group enables. This ensures that
+ * kvm_arch_vcpu_runnable has up-to-date data to decide whether
+ * we have pending interrupts, e.g. when determining if the
+ * vCPU should block.
+ *
+ * For the same reason, we want to tell GICv4 that we need
+ * doorbells to be signalled, should an interrupt become pending.
+ */
+ preempt_disable();
+ kvm_vgic_vmcr_sync(vcpu);
+ vgic_v4_put(vcpu, true);
+ preempt_enable();
+
kvm_vcpu_block(vcpu);
kvm_clear_request(KVM_REQ_UNHALT, vcpu);
+
+ preempt_disable();
+ vgic_v4_load(vcpu);
+ preempt_enable();
}
kvm_incr_pc(vcpu);
More information about the linux-arm-kernel
mailing list