[PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale

[Krzysztof Kozlowski]

The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS
GPIO is not enabled.  Although previously bindings required providing
this safe DVS voltage, but since commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") this
was ignored.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a771542e28b8..3583095fbb2a 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -240,9 +240,6 @@ pmic at 66 {
 		vinl8-supply = <&buck8_reg>;
 		vinl9-supply = <&buck8_reg>;
 
-		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
 					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
 					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
-- 
2.30.2