[PATCH v5 2/6] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka at siemens.com>

The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
Acked-by: Aswath Govindraju <a-govindraju at ti.com>
Acked-by: Suman Anna <s-anna at ti.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 6261ca8ee2d8..58c8e64d5885 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -716,3 +716,27 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
--
2.31.1