[PATCH 07/10] i2c: pasemi: Allow to configure bus frequency

Sven Peter sven at svenpeter.dev
Sun Sep 26 02:58:44 PDT 2021


Right now the bus frequency has always been hardcoded as
100 KHz with the specific reference clock used in the PASemi
PCI controllers. Make this configurable to prepare for the
platform driver.

Signed-off-by: Sven Peter <sven at svenpeter.dev>
---
 drivers/i2c/busses/i2c-pasemi-core.c | 8 +++-----
 drivers/i2c/busses/i2c-pasemi-core.h | 1 +
 drivers/i2c/busses/i2c-pasemi-pci.c  | 4 ++++
 3 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
index 7c6715f5dbb8..a39e3258b162 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.c
+++ b/drivers/i2c/busses/i2c-pasemi-core.c
@@ -39,9 +39,6 @@
 #define CTL_MTR		0x00000200
 #define CTL_CLK_M	0x000000ff
 
-#define CLK_100K_DIV	84
-#define CLK_400K_DIV	21
-
 static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val)
 {
 	dev_dbg(smbus->dev, "smbus write reg %lx val %08x\n",
@@ -63,8 +60,9 @@ static inline int reg_read(struct pasemi_smbus *smbus, int reg)
 
 static void pasemi_reset(struct pasemi_smbus *smbus)
 {
-	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
-		  (CLK_100K_DIV & CTL_CLK_M)));
+	u32 val = (CTL_MTR | CTL_MRR | (smbus->clk_div & CTL_CLK_M));
+
+	reg_write(smbus, REG_CTL, val);
 }
 
 static void pasemi_smb_clear(struct pasemi_smbus *smbus)
diff --git a/drivers/i2c/busses/i2c-pasemi-core.h b/drivers/i2c/busses/i2c-pasemi-core.h
index 7acc33de6ce1..30a7990825ef 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.h
+++ b/drivers/i2c/busses/i2c-pasemi-core.h
@@ -14,6 +14,7 @@ struct pasemi_smbus {
 	void __iomem		*ioaddr;
 	unsigned long		 base;
 	int			 size;
+	unsigned int		 clk_div;
 };
 
 int pasemi_i2c_common_probe(struct pasemi_smbus *smbus);
diff --git a/drivers/i2c/busses/i2c-pasemi-pci.c b/drivers/i2c/busses/i2c-pasemi-pci.c
index 9a19df31866b..7405e0b48514 100644
--- a/drivers/i2c/busses/i2c-pasemi-pci.c
+++ b/drivers/i2c/busses/i2c-pasemi-pci.c
@@ -17,6 +17,9 @@
 
 #include "i2c-pasemi-core.h"
 
+#define CLK_100K_DIV	84
+#define CLK_400K_DIV	21
+
 static struct pci_driver pasemi_smb_pci_driver;
 
 static int pasemi_smb_pci_probe(struct pci_dev *dev,
@@ -35,6 +38,7 @@ static int pasemi_smb_pci_probe(struct pci_dev *dev,
 	smbus->dev = &dev->dev;
 	smbus->base = pci_resource_start(dev, 0);
 	smbus->size = pci_resource_len(dev, 0);
+	smbus->clk_div = CLK_100K_DIV;
 
 	if (!request_region(smbus->base, smbus->size,
 			    pasemi_smb_pci_driver.name)) {
-- 
2.25.1




More information about the linux-arm-kernel mailing list