[PATCH] tty: serial: samsung: describe driver in KConfig

[Krzysztof Kozlowski]

Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
 drivers/tty/serial/Kconfig | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 131a6a587acd..6ff94cfcd9db 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -239,10 +239,11 @@ config SERIAL_SAMSUNG
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
 	select SERIAL_CORE
 	help
-	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
-	  provide all of these ports, depending on how the serial port
-	  pins are configured.
+	  Support for the on-chip UARTs on the Samsung
+	  S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
+	  /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
+	  these ports, depending on how the serial port pins are configured.
+	  Choose Y/M here only if you build for such SoC.
 
 config SERIAL_SAMSUNG_UARTS_4
 	bool
-- 
2.30.2