[PATCH 1/4] firmware: xilinx: Add OSPI Mux selection support
Sai Krishna Potthuri
lakshmi.sai.krishna.potthuri at xilinx.com
Fri Sep 24 03:07:08 PDT 2021
Add OSPI Mux selection API support to select the AXI interface to OSPI.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri at xilinx.com>
---
drivers/firmware/xilinx/zynqmp.c | 17 +++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 15b138326ecc..43c3b5a9eef7 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -647,6 +647,23 @@ int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
+/**
+ * zynqmp_pm_ospi_mux_select() - OSPI Mux selection
+ *
+ * @dev_id: Device Id of the OSPI device.
+ * @select: OSPI Mux select value.
+ *
+ * This function select the OSPI Mux.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, dev_id, IOCTL_OSPI_MUX_SELECT,
+ select, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_ospi_mux_select);
+
/**
* zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
* @index: GGS register index
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 9d1a5c175065..6979a79f553a 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -119,6 +119,7 @@ enum pm_ioctl_id {
IOCTL_READ_PGGS = 15,
/* Set healthy bit value */
IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+ IOCTL_OSPI_MUX_SELECT = 21,
};
enum pm_query_id {
@@ -347,6 +348,11 @@ enum zynqmp_pm_shutdown_subtype {
ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM = 2,
};
+enum ospi_mux_select_type {
+ PM_OSPI_MUX_SEL_DMA = 0,
+ PM_OSPI_MUX_SEL_LINEAR = 1,
+};
+
/**
* struct zynqmp_pm_query_data - PM query data
* @qid: query ID
@@ -383,6 +389,7 @@ int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data);
int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data);
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value);
int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type);
+int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select);
int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag);
int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status);
@@ -503,6 +510,11 @@ static inline int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
return -ENODEV;
}
+static inline int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select)
+{
+ return -ENODEV;
+}
+
static inline int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag)
{
--
2.17.1
More information about the linux-arm-kernel
mailing list