[PATCH v14 0/5] Mediatek pinctrl patch on mt8195

[Zhiyong Tao]

This series includes 5 patches:
1.add rsel define.
2.change pull up/down description
3.fix coding style
4.support rsel feature for common ICs
5.add rsel setting on MT8195

Changes in patch v14:
1)add a schema and new property "mediatek, rsel_resistance_in_si_unit"
  on patch 2/5.
2)fix kernel-doc style comment on patch 4/5.
3)add review-by on patch 3/5 and 5/5.

Changes in patch v13:
1)change "-EOPNOTSUPP" to "-ENOTSUPP" in patch 4/5.
2)fix description on 2/5.

Changes in patch v12:
1)add "ack-by" on "rsel define" patch.
2)add "change reason" in commit message and write a shema
  on patch document patch 2/5.
3)separate eint pm_ops fucntion support patch
4)separate rsel patch, the common parts as patch 4/5 to support
  common ICs. The mt8195 specific changes as patch 5/5.
5)add fix coding style patch to fix Camel spelling to avoid checkpatch
  warning in a following patch.
6)remove unrelated changes in rsel patch.
7)change ternary ops in resel patch
8)add "rsel_is_unit" property on struct mtk_pinctrl, and itendify
  "mediatek,rsel_resistance_in_si_unit" property in probe function.
9)add explanation for "MTK_PULL_RSEL_TYPE" and "MTK_PULL_PU_PD_RSEL_TYPE".
10) fix spell warning in rsel patch.

Changes in patch v11:
1)add pm_ops fucntion support
2)change pull up/down description
3)add resistance value feature support.

Changes in patch v10:
1)fix PARENTHESIS_ALIGNMENT of mtk_pinconf_bias_set_rsel
2)fix LONG_LINE warning in 615 in pinctrl-paris.c.

Changes in patch v9:
1)fix "mtk_pinconf_bias_set_rsel" build warning.

Changes in patch v8:
1)add rsel define patch
2)avoid  CamelCase
3)add pinctrl rsel setting patch which is another resistance selection
  solution for I2C on MT8195.

Changes in patch v7:
1)add version in patch and fix spelling mistakes.

Changes in patch v6:
1)add "pintcrl: mediatek" as prefix.

Changes in patch v5:
1)document and driver patch are apploed.
2)change '-EOPNOTSUPP' to '-ENOTSUPP'

Changes in patch v4:
1)fix pinctrl-mt8195.yaml warning error.
2)remove pinctrl device node patch which is based on "mt8195.dtsi".

Changes in patch v3:
1)change '^pins' to '-pins$'.
2)change 'state_0_node_a' to 'gpio_pin' which is defined in dts.
3)change 'state_0_node_b' to 'i2c0_pin' which is defined in dts.
4)reorder this series patches. change pinctrl file and binding document
together in one patch.

There are no changes in v1 & v2.

Zhiyong Tao (5):
  dt-bindings: pinctrl: mt8195: add rsel define
  dt-bindings: pinctrl: mt8195: change pull up/down description
  pinctrl: mediatek: fix coding style
  pinctrl: mediatek: support rsel feature
  pinctrl: mediatek: add rsel setting on MT8195

 .../bindings/pinctrl/pinctrl-mt8195.yaml      |  86 ++++++-
 drivers/pinctrl/mediatek/pinctrl-mt8195.c     | 133 ++++++++++
 .../pinctrl/mediatek/pinctrl-mtk-common-v2.c  | 231 +++++++++++++++---
 .../pinctrl/mediatek/pinctrl-mtk-common-v2.h  |  46 ++++
 drivers/pinctrl/mediatek/pinctrl-paris.c      |  68 ++++--
 include/dt-bindings/pinctrl/mt65xx.h          |   9 +
 6 files changed, 519 insertions(+), 54 deletions(-)

--
2.18.0