[PATCH v4 1/1] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile
Chen-Yu Tsai
wenst at chromium.org
Fri Sep 24 00:45:29 PDT 2021
Hi,
On Wed, Sep 22, 2021 at 5:43 PM Seiya Wang <seiya.wang at mediatek.com> wrote:
>
> Add basic chip support for Mediatek MT8195
>
> Signed-off-by: Seiya Wang <seiya.wang at mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 29 +
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1024 +++++++++++++++++++++++++++
> 3 files changed, 1054 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 4f68ebed2e31..7aa08bb4c078 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -32,4 +32,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> new file mode 100644
> index 000000000000..82bb10e9a531
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Seiya Wang <seiya.wang at mediatek.com>
> + */
> +/dts-v1/;
> +#include "mt8195.dtsi"
> +
> +/ {
> + model = "MediaTek MT8195 evaluation board";
> + compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
Can you enable anything else? I assume there should at least be some
storage, USB, and PMICs? Even if the hardware isn't publicly available,
it will give us some idea about what is usable, and if and how they hook
up to external components.
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> new file mode 100644
> index 000000000000..b2ff83882e2e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -0,0 +1,1024 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + * Author: Seiya Wang <seiya.wang at mediatek.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/clock/mt8195-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +#include <dt-bindings/reset/ti-syscon.h>
> +
> +/ {
> + compatible = "mediatek,mt8195";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
IIRC we have moved away from having a dedicated "clocks" node to group
clock device nodes. Just move the following two device nodes up one
level.
> + clk26m: oscillator0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55", "arm,armv8";
> + reg = <0x000>;
> + enable-method = "psci";
> + clock-frequency = <1701000000>;
> + capacity-dmips-mhz = <578>;
> + cpu-idle-states = <&cpuoff_l &clusteroff_l>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55", "arm,armv8";
> + reg = <0x100>;
> + enable-method = "psci";
> + clock-frequency = <1701000000>;
> + capacity-dmips-mhz = <578>;
> + cpu-idle-states = <&cpuoff_l &clusteroff_l>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu at 200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55", "arm,armv8";
> + reg = <0x200>;
> + enable-method = "psci";
> + clock-frequency = <1701000000>;
> + capacity-dmips-mhz = <578>;
> + cpu-idle-states = <&cpuoff_l &clusteroff_l>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu at 300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55", "arm,armv8";
> + reg = <0x300>;
> + enable-method = "psci";
> + clock-frequency = <1701000000>;
> + capacity-dmips-mhz = <578>;
> + cpu-idle-states = <&cpuoff_l &clusteroff_l>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu4: cpu at 400 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78", "arm,armv8";
> + reg = <0x400>;
> + enable-method = "psci";
> + clock-frequency = <2171000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpuoff_b &clusteroff_b>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu5: cpu at 500 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78", "arm,armv8";
> + reg = <0x500>;
> + enable-method = "psci";
> + clock-frequency = <2171000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpuoff_b &clusteroff_b>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu6: cpu at 600 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78", "arm,armv8";
> + reg = <0x600>;
> + enable-method = "psci";
> + clock-frequency = <2171000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpuoff_b &clusteroff_b>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu7: cpu at 700 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78", "arm,armv8";
> + reg = <0x700>;
> + enable-method = "psci";
> + clock-frequency = <2171000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpuoff_b &clusteroff_b>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + cluster1 {
> + core0 {
> + cpu = <&cpu4>;
> + };
> + core1 {
> + cpu = <&cpu5>;
> + };
> + core2 {
> + cpu = <&cpu6>;
> + };
> + core3 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + idle-states {
> + entry-method = "arm,psci";
> + cpuoff_l: cpuoff_l {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x00010001>;
> + local-timer-stop;
> + entry-latency-us = <50>;
> + exit-latency-us = <95>;
> + min-residency-us = <580>;
> + };
> + cpuoff_b: cpuoff_b {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x00010001>;
> + local-timer-stop;
> + entry-latency-us = <45>;
> + exit-latency-us = <140>;
> + min-residency-us = <740>;
> + };
> + clusteroff_l: clusteroff_l {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x01010002>;
> + local-timer-stop;
> + entry-latency-us = <55>;
> + exit-latency-us = <155>;
> + min-residency-us = <840>;
> + };
> + clusteroff_b: clusteroff_b {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x01010002>;
> + local-timer-stop;
> + entry-latency-us = <50>;
> + exit-latency-us = <200>;
> + min-residency-us = <1000>;
> + };
> + };
> +
> + l2_0: l2-cache0 {
> + compatible = "cache";
> + next-level-cache = <&l3_0>;
> + };
> +
> + l2_1: l2-cache1 {
> + compatible = "cache";
> + next-level-cache = <&l3_0>;
> + };
> +
> + l3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> +
> + dsu-pmu {
> + compatible = "arm,dsu-pmu";
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
> + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> + };
> +
> + pmu-a55 {
> + compatible = "arm,cortex-a55-pmu";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> + };
> +
> + pmu-a78 {
> + compatible = "arm,cortex-a78-pmu";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + timer: timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
> + clock-frequency = <13000000>;
> + };
The interrupts for the PMUs and arch timer aren't listed, as the interrupt
table in the datasheet isn't for the GIC, but another interrupt controller
used in low power modes. It does contain mappings to the GIC for most, but
not all interrupts.
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller at c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + #redistributor-regions = <1>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>,
> + <0 0x0c040000 0 0x200000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> + };
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
> + };
> + };
> + };
> +
[...]
> + pio: pinctrl at 10005000 {
> + compatible = "mediatek,mt8195-pinctrl";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x11d10000 0 0x1000>,
> + <0 0x11d30000 0 0x1000>,
> + <0 0x11d40000 0 0x1000>,
> + <0 0x11e20000 0 0x1000>,
> + <0 0x11eb0000 0 0x1000>,
> + <0 0x11f40000 0 0x1000>,
> + <0 0x1000b000 0 0x1000>;
> + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
> + "iocfg_br", "iocfg_lm", "iocfg_rb",
> + "iocfg_tl", "eint";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 144>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
If I am reading the datasheet correctly, this interrupt line is listed as
reserved. OTOH there are a bunch of EINT interrupts.
> + #interrupt-cells = <2>;
> +
> + pmif_pin: pmif_default_pin {
> + pinmux = <PINMUX_GPIO36__FUNC_RTC32K_CK>,
> + <PINMUX_GPIO40__FUNC_PWRAP_SPI0_CSN>,
> + <PINMUX_GPIO41__FUNC_PWRAP_SPI0_CK>,
> + <PINMUX_GPIO42__FUNC_PWRAP_SPI0_MO>,
> + <PINMUX_GPIO43__FUNC_PWRAP_SPI0_MI>,
> + <PINMUX_GPIO44__FUNC_SPMI_M_SCL>,
> + <PINMUX_GPIO45__FUNC_SPMI_M_SDA>;
> + };
> + };
> +
> + pwrap: pwrap at 10024000 {
> + compatible = "mediatek,mt8195-pwrap", "syscon";
> + reg = <0 0x10024000 0 0x1000>;
The datasheet I have doesn't provide a memory map, nor is there a section
for this hardware block. As such I can't verify the register region.
> + reg-names = "pwrap";
> + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
> + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
> + clock-names = "spi", "wrap";
> + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
> + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmif_pin>;
> + };
[...]
> + mmc1: mmc at 11240000 {
> + compatible = "mediatek,mt8195-mmc",
> + "mediatek,mt8192-mmc";
> + reg = <0 0x11240000 0 0x1000>,
> + <0 0x11c70000 0 0x1000>;
> + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&topckgen CLK_TOP_MSDC30_1>,
> + <&infracfg_ao CLK_INFRA_AO_MSDC1>,
> + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
> + clock-names = "source", "hclk", "source_cg";
> + status = "disabled";
> + };
> +
mmc2 missing?
> + imp_iic_wrap_s: syscon at 11d03000 {
> + compatible = "mediatek,mt8195-imp_iic_wrap_s", "syscon";
> + reg = <0 0x11d03000 0 0x1000>;
> + #clock-cells = <1>;
> + };
The datasheet I have doesn't provide a memory map, nor is there a section
for this hardware block. As such I can't verify the register region.
> + imp_iic_wrap_w: syscon at 11e05000 {
> + compatible = "mediatek,mt8195-imp_iic_wrap_w", "syscon";
> + reg = <0 0x11e05000 0 0x1000>;
> + #clock-cells = <1>;
> + };
The datasheet I have doesn't provide a memory map, nor is there a section
for this hardware block. As such I can't verify the register region.
[...]
> + wpesys: syscon at 14e00000 {
> + compatible = "mediatek,mt8195-wpesys", "syscon";
> + reg = <0 0x14e00000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + wpesys_vpp0: syscon at 14e02000 {
> + compatible = "mediatek,mt8195-wpesys_vpp0", "syscon";
> + reg = <0 0x14e02000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + wpesys_vpp1: syscon at 14e03000 {
> + compatible = "mediatek,mt8195-wpesys_vpp1", "syscon";
> + reg = <0 0x14e03000 0 0x1000>;
> + #clock-cells = <1>;
> + };
The datasheet I have doesn't provide a memory map, nor is there a section
for the wpe related hardware blocks. As such I can't verify the register
region.
[...]
> + vdecsys_soc: syscon at 1800f000 {
> + compatible = "mediatek,mt8195-vdecsys_soc", "syscon";
> + reg = <0 0x1800f000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: syscon at 1802f000 {
> + compatible = "mediatek,mt8195-vdecsys", "syscon";
> + reg = <0 0x1802f000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys_core1: syscon at 1803f000 {
> + compatible = "mediatek,mt8195-vdecsys_core1", "syscon";
> + reg = <0 0x1803f000 0 0x1000>;
> + #clock-cells = <1>;
> + };
The datasheet I have doesn't provide a memory map, nor is there a section
for the vdec related hardware blocks. As such I can't verify the register
region.
[...]
> + vencsys: syscon at 1a000000 {
> + compatible = "mediatek,mt8195-vencsys", "syscon";
> + reg = <0 0x1a000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys_core1: syscon at 1b000000 {
> + compatible = "mediatek,mt8195-vencsys_core1", "syscon";
> + reg = <0 0x1b000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
The datasheet I have doesn't provide a memory map, nor is there a section
for the venc related hardware blocks. As such I can't verify the register
region.
Besides the aforementioned parts, all the memory ranges, interrupt lines,
and clocks seem to be in order.
ChenYu
More information about the linux-arm-kernel
mailing list