[PATCH v3 28/33] iommu/mediatek: Add bank_nr and bank_enable
Yong Wu
yong.wu at mediatek.com
Thu Sep 23 04:58:35 PDT 2021
Prepare for supporting multi banks, Adds two variables in the plat_data:
bank_nr: the bank number that this SoC support;
bank_enable: list if the banks is enabled.
Add them for all the current SoC, bank_nr always is 1 and only
bank_enable[0] is enabled.
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++++
drivers/iommu/mtk_iommu.h | 3 +++
2 files changed, 21 insertions(+)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c139675d99e6..4ad85469f68f 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1134,6 +1134,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
@@ -1144,6 +1146,8 @@ static const struct mtk_iommu_plat_data mt6779_data = {
.flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
@@ -1154,6 +1158,8 @@ static const struct mtk_iommu_plat_data mt8167_data = {
.flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
@@ -1165,6 +1171,8 @@ static const struct mtk_iommu_plat_data mt8173_data = {
HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
@@ -1174,6 +1182,8 @@ static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.flags = RESET_AXI | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
@@ -1185,6 +1195,8 @@ static const struct mtk_iommu_plat_data mt8192_data = {
WR_THROT_EN | IOVA_34_EN | NOT_STD_AXI_MODE |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
@@ -1196,6 +1208,8 @@ static const struct mtk_iommu_plat_data mt8195_data_infra = {
.flags = WR_THROT_EN | DCM_DISABLE |
MTK_IOMMU_TYPE_INFRA | IFA_IOMMU_PCIe_SUPPORT,
.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
+ .bank_nr = 1,
+ .bank_enable = {true},
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
@@ -1208,6 +1222,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vdo = {
SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
@@ -1221,6 +1237,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vpp = {
SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
+ .bank_nr = 1,
+ .bank_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{1}, {3}, {22, 0, 0, 0, 23}, {8},
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 881fade8d39a..dc0190edebf0 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -62,6 +62,9 @@ struct mtk_iommu_plat_data {
struct list_head *hw_list;
unsigned int iova_region_nr;
const struct mtk_iommu_iova_region *iova_region;
+
+ unsigned int bank_nr;
+ bool bank_enable[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
--
2.18.0
More information about the linux-arm-kernel
mailing list