[PATCH v3 09/33] iommu/mediatek: Remove for_each_m4u in tlb_sync_all

Yong Wu yong.wu at mediatek.com
Thu Sep 23 04:58:16 PDT 2021


The tlb_sync_all is called from these three functions:
a) flush_iotlb_all: it will be called for each a iommu HW.
b) tlb_flush_range_sync: it already has for_each_m4u.
c) in irq: When IOMMU HW translation fault, Only need flush itself.

Thus, No need for_each_m4u in this tlb_sync_all. Remove it.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6f4f6624e3ac..0b4c30baa864 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -206,19 +206,15 @@ static struct mtk_iommu_domain *to_mtk_domain(struct iommu_domain *dom)
 
 static void mtk_iommu_tlb_flush_all(struct mtk_iommu_data *data)
 {
-	struct list_head *head = data->hw_list;
-
-	for_each_m4u(data, head) {
-		if (pm_runtime_get_if_in_use(data->dev) <= 0)
-			continue;
+	if (pm_runtime_get_if_in_use(data->dev) <= 0)
+		return;
 
-		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + data->plat_data->inv_sel_reg);
-		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
-		wmb(); /* Make sure the tlb flush all done */
+	writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
+		       data->base + data->plat_data->inv_sel_reg);
+	writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
+	wmb(); /* Make sure the tlb flush all done */
 
-		pm_runtime_put(data->dev);
-	}
+	pm_runtime_put(data->dev);
 }
 
 static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
-- 
2.18.0




More information about the linux-arm-kernel mailing list