[PATCH v2 2/2] arm64: dts: qcom: sm8250: Add Coresight support

[Tao Zhang]

On Tue, Sep 21, 2021 at 05:35:37PM +0100, Suzuki K Poulose wrote:
> Hi Tao
> 
> Are there no sinks at all on this platform ? I had this question on the
> previous series. How is CoreSight useful on this platform otherwise ?
> 
> On 13/09/2021 07:40, Tao Zhang wrote:
ETF/ETR are the sinks on this target. And I have added the ETF to this
device tree file. Since the ETR needs SMMU support on this target and
SMMU has not been supported for now. I will add the ETR to device tree
later if the SMMU is ready for this platform.
> >Add the basic coresight components found on Qualcomm SM8250 Soc. The
> >basic coresight components include ETF, ETMs,STM and the related
> >funnels.
> >
> >Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
> >---
> >  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 442 ++++++++++++++++++++++-
> >  1 file changed, 438 insertions(+), 4 deletions(-)
> >
> >diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> >index 8ac96f8e79d4..9c8f87d80afc 100644
> >--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> >+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> >@@ -222,11 +222,445 @@
> >  		regulator-max-microvolt = <1800000>;
> >  		regulator-always-on;
> >  	};
> >-};
> >-&adsp {
> >-	status = "okay";
> >-	firmware-name = "qcom/sm8250/adsp.mbn";
> 
> Unrelated change ? Please keep it separate from the CoreSight changes.
> 
> Suzuki
I combined this change and ETM pid change into one seies because the ETM
pid change validation needs ETM support. If there is no ETM
configuration in the device tree, ETM pid change can not be verified.
Do you think it would be better to separate them? Do I need to resubmit
to separate them into two separate patches?

Best,
Tao