[PATCH 1/4] i2c: stm32f7: flush TX FIFO upon transfer errors

Pierre Yves MORDRET pierre-yves.mordret at foss.st.com
Thu Sep 23 01:35:38 PDT 2021


Hi Alain

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret at foss.st.com>

Regards

On 9/20/21 5:21 PM, Alain Volmat wrote:
> While handling an error during transfer (ex: NACK), it could
> happen that the driver has already written data into TXDR
> before the transfer get stopped.
> This commit add TXDR Flush after end of transfer in case of error to
> avoid sending a wrong data on any other slave upon next transfer.
> 
> Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
> 
> Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index b9b19a2a2ffa..ed977b6f7ab6 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1696,6 +1696,16 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
>  	time_left = wait_for_completion_timeout(&i2c_dev->complete,
>  						i2c_dev->adap.timeout);
>  	ret = f7_msg->result;
> +	if (ret) {
> +		/*
> +		 * It is possible that some unsent data have already been
> +		 * written into TXDR. To avoid sending old data in a
> +		 * further transfer, flush TXDR in case of any error
> +		 */
> +		writel_relaxed(STM32F7_I2C_ISR_TXE,
> +			       i2c_dev->base + STM32F7_I2C_ISR);
> +		goto pm_free;
> +	}
>  
>  	if (!time_left) {
>  		dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
> @@ -1744,8 +1754,16 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
>  	timeout = wait_for_completion_timeout(&i2c_dev->complete,
>  					      i2c_dev->adap.timeout);
>  	ret = f7_msg->result;
> -	if (ret)
> +	if (ret) {
> +		/*
> +		 * It is possible that some unsent data have already been
> +		 * written into TXDR. To avoid sending old data in a
> +		 * further transfer, flush TXDR in case of any error
> +		 */
> +		writel_relaxed(STM32F7_I2C_ISR_TXE,
> +			       i2c_dev->base + STM32F7_I2C_ISR);
>  		goto pm_free;
> +	}
>  
>  	if (!timeout) {
>  		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
> 

-- 
--
~ Py MORDRET
--



More information about the linux-arm-kernel mailing list