[PATCH 3/4] ARM: dts: imx: add devicetree for Kobo Libra H2O

[Krzysztof Kozlowski]

On Wed, 22 Sept 2021 at 22:38, Andreas Kemnade <andreas at kemnade.info> wrote:
>
> Hi,
>
> On Wed, 22 Sep 2021 09:41:39 +0200
> Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
> [...]
> > > +       pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
> >
> > Thanks for the patch.
> >
> > This does not look like passing the schema validation. Please run
> > dtbs_check. The node names should use hyphens and end with "grp"
> > suffix. This remark applies to other cases below.
> >
> dtbs_check reports a lot of errors originating from imx6sll.dtsi and
> friends. But nothing added by me. But yes, node names should use
> hyphens, that is documented. I will fix that.
>
> But having -grp at the end for these things with a frequency in the
> name is uncommon.
> $ grep -R :.*100mhz arch/arm/boot/dts/imx6s*.dts
> arch/arm/boot/dts/imx6sl-evk.dts:               pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> arch/arm/boot/dts/imx6sl-evk.dts:               pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> arch/arm/boot/dts/imx6sl-evk.dts:               pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> arch/arm/boot/dts/imx6sll-evk.dts:      pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
> arch/arm/boot/dts/imx6sll-evk.dts:      pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:     pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
> arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:     pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:    pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
> arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:    pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:   pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
> arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:   pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> arch/arm/boot/dts/imx6sl-tolino-shine3.dts:     pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
> arch/arm/boot/dts/imx6sl-tolino-shine3.dts:     pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> arch/arm/boot/dts/imx6sl-tolino-vision5.dts:    pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
> arch/arm/boot/dts/imx6sl-tolino-vision5.dts:    pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> arch/arm/boot/dts/imx6sl-warp.dts:              pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> arch/arm/boot/dts/imx6sl-warp.dts:              pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> arch/arm/boot/dts/imx6sx-nitrogen6sx.dts:       pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
> arch/arm/boot/dts/imx6sx-sabreauto.dts: pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:       pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
> arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:       pinctrl_usdhc4_100mhz: usdhc4-100mhz {

I was fixing primarily arm64 boards and did not touch that many of armv7:
grep -R :.*100mhz.*grp arch/arm64/boot/dts/freescale/* | wc -l
46

Best regards,
Krzysztof