[PATCH v11 05/16] dt-bindings: display: mediatek: merge: add additional prop for mt8195

jason-jh.lin jason-jh.lin at mediatek.com
Tue Sep 21 08:52:07 PDT 2021


add MERGE additional properties description for mt8195:
1. async clock
2. fifo setting enable
3. reset controller

Signed-off-by: jason-jh.lin <jason-jh.lin at mediatek.com>
---
 .../display/mediatek/mediatek,merge.yaml      | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index 75beeb207ceb..542dd7137d3b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -38,6 +38,19 @@ properties:
   clocks:
     items:
       - description: MERGE Clock
+      - description: MERGE Async Clock
+          Controlling the synchronous process between MERGE and other display
+          function blocks cross clock domain.
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
 
   mediatek,gce-client-reg:
     description:
@@ -50,6 +63,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
 
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -67,3 +85,16 @@ examples:
         power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         clocks = <&mmsys CLK_MM_DISP_MERGE>;
     };
+
+    merge5: disp_vpp_merge5 at 1c110000 {
+        compatible = "mediatek,mt8195-disp-merge";
+        reg = <0 0x1c110000 0 0x1000>;
+        interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+                 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+        clock-names = "merge","merge_async";
+        power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
+        mediatek,merge-fifo-en = <1>;
+        resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+    };
-- 
2.18.0




More information about the linux-arm-kernel mailing list