[PATCH 2/4] i2c: stm32f7: recover the bus on access timeout

[Alain Volmat]

When getting an access timeout, ensure that the bus is in a proper
state prior to returning the error.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index ed977b6f7ab6..ad3459a3bc5e 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1712,6 +1712,7 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
 			i2c_dev->msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_all(dma->chan_using);
+		stm32f7_i2c_wait_free_bus(i2c_dev);
 		ret = -ETIMEDOUT;
 	}
 
@@ -1769,6 +1770,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_all(dma->chan_using);
+		stm32f7_i2c_wait_free_bus(i2c_dev);
 		ret = -ETIMEDOUT;
 		goto pm_free;
 	}
-- 
2.25.1