[PATCH] ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey

[Alexandre TORGUE]

Hi

On 8/26/21 4:45 PM, Grzegorz Szymaszek wrote:
> The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The
> DCMI pins used on this output are defined in the pin state definition
> &pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit
> 02814a41529a55dbfb9fbb2a3728e78e70646ea6). Set these pins as the default
> pinctrl of the DCMI peripheral in the board device tree.
> 
> The pins are not used for any other purpose, so it seems safe to assume
> most users will not need to override (delete) what this patch provides.
> status defaults to "disabled", so the peripheral will not be
> unnecessarily started. And the users who actually intend to make use of
> a camera on the DVP port will have this little part of the configuration
> ready.
> 
> Signed-off-by: Grzegorz Szymaszek <gszymaszek at short.pl>
> ---
>   arch/arm/boot/dts/stm32mp157c-odyssey.dts | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> index be1dd5e9e744..554f5d3bcdc3 100644
> --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> @@ -22,6 +22,12 @@ chosen {
>   	};
>   };
>   
> +&dcmi {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&dcmi_pins_b>;
> +	pinctrl-1 = <&dcmi_sleep_pins_b>;
> +};
> +
>   &ethernet0 {
>   	status = "okay";
>   	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> 

Applied on stm32-next.

Thanks
Alex