[PATCH 0/7] Add STM32MP13 SoCs and discovery board support

[Alexandre TORGUE]

On 7/23/21 3:28 PM, Alexandre Torgue wrote:
> This series enhance the STM32 MPU family by adding STM32MP13 SoCs support.
> It adds machine support and device tree diversity to support the whole
> stm32mp13 family (STM32MP131/STM32MP133/STM32MP135, plus security feature
> diversity).
> 
> Basically STM32MP13 SoCs embeds one Cortex A7, storage (SD/MMC/SDIO, QSPI FMC),
> network (ETH, CAN), display (DCMIPP, LTDC, ...), audio(SAI, DFSDM, SPDIFRX),
> com (USB EHCI/OHCI, USB OTG, I2C, SPI/I2S, U(S)ART).
> 
> This series also adds STM32MP135F Discovery board support (stm32mp135f-dk). It
> embeds a STM32MP135f SOC with 512 MB of DDR3. Several connections are available
> on this board:
>   - 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...
> 
> Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.
> 
> Note that file stm32mp135.dtsi doesn't define nodes but I add it now to ease adding
> of new nodes in a (close) future.
> 
> regards
> Alex
> 
> Alexandre Torgue (7):
>    dt-bindings: pinctrl: stm32: add new compatible for STM32MP135 SoC
>    pinctrl: stm32: Add STM32MP135 SoC support
>    docs: arm: stm32: introduce STM32MP13 SoCs
>    ARM: stm32: add initial support for STM32MP13 family
>    ARM: dts: stm32: add STM32MP13 SoCs support
>    dt-bindings: stm32: document stm32mp135f-dk board
>    ARM: dts: stm32: add initial support of stm32mp135f-dk board
> 
>   Documentation/arm/index.rst                   |    1 +
>   .../arm/stm32/stm32mp13-overview.rst          |   37 +
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |    4 +
>   .../bindings/pinctrl/st,stm32-pinctrl.yaml    |    1 +
>   arch/arm/boot/dts/Makefile                    |    1 +
>   arch/arm/boot/dts/stm32mp13-pinctrl.dtsi      |   64 +
>   arch/arm/boot/dts/stm32mp131.dtsi             |  283 +++
>   arch/arm/boot/dts/stm32mp133.dtsi             |   37 +
>   arch/arm/boot/dts/stm32mp135.dtsi             |   12 +
>   arch/arm/boot/dts/stm32mp135f-dk.dts          |   56 +
>   arch/arm/boot/dts/stm32mp13xc.dtsi            |   17 +
>   arch/arm/boot/dts/stm32mp13xf.dtsi            |   17 +
>   arch/arm/mach-stm32/Kconfig                   |    8 +
>   arch/arm/mach-stm32/board-dt.c                |    3 +
>   drivers/pinctrl/stm32/Kconfig                 |    6 +
>   drivers/pinctrl/stm32/Makefile                |    1 +
>   drivers/pinctrl/stm32/pinctrl-stm32mp135.c    | 1679 +++++++++++++++++
>   17 files changed, 2227 insertions(+)
>   create mode 100644 Documentation/arm/stm32/stm32mp13-overview.rst
>   create mode 100644 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp131.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp133.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp135.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp135f-dk.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp13xc.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp13xf.dtsi
>   create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp135.c
> 

With minor changes (cryp@ to crypto@), patches 3 to 7 applied on stm32-next.

Regards
Alex